Got the car on the track today "FINALLY"

[Danger Dude]

Well my car finally made it on the track today. With the 4th Fordchip reburn in hand I felt the car was running good enough to run today at the Track day. I pulled of all the Nitrous stuff yesterday so I will be N/A till I get my Procharger.

I ran a 10.188 at 74 MPH N/A in the 1/8

I also drove Jeff's stang and posted a 11.1 64mph on a stock motor except a densecharger

[Thomas91169]

yo why dont you post your 1/4 mile time not a 1/8 mile time? im guessing you got like a 14-14.5?

[Danger Dude]

Well to be honest if I pisted my 1/4 mile it the track I ran at I would have been going down hill in the woods HAHAHAHHAHAHAHAH It is a 1/8 track you silly silly Birdman

[Ken]

Isn't 10seconds pretty slow for the 1/8th?

I've never been to a track so I have absolutely no clue.

[Danger Dude]

Really fast cars with 400 plus HP run 8.4 to 8.8
03 Mach 1's run 9.1-9.2 at 305 hp
fox bodies with slightly modified 5.0's are running 9.4 to 9.8I posted a 10.1 and was the first time on the track in 3 years and the first in my stang. remember I ran a 11.1 at 64MPH in Jeff's ( KrazyPony98) stock 98 V6

Could mine be better yes but I was track security yesterday so I did not have alot of time to run the car. I have a dyno day set up this friday though and then will see how the new chip is working. I would like to try and get into the mid 9"s if possible N/A. I am really looking forward to getting a AL drive shaft and PI 3000 Converter along with a Procharger

[Jime]

Originally Posted by Danger Dude

Really fast cars with 400 plus HP run 7.4 to 8. 1
03 Mach 1's run 9.1-9.2 at 305 hp
fox bodies with slightly modified 5.0's are running 9.4 to 9.8I posted a 10.1 and was the first time on the track in 3 years and the first in my stang. remember I ran a 11.1 at 64MPH in Jeff's ( KrazyPony98) stock 98 V6

I have a Maxima that did it in 7.8 @ 90 MPH with less than 300 HP. That is with a 150 shot of Nitrous. With a 35 shot it did it in 8.4 secs.

This weekend I will find out what my 2003 3.8 will do with the same NX kit on it.

http://www.maxima.org/forums/showthread.php?t=218852

[Danger Dude]

well with a 150 shot of nitrous you were near 300 or maybe even over and then there is he weight issue. But good runs anyway

[v6stanger]

My 13.4 was an 8.4 in the 1/4 mile

My 15.0 was a 9.6 in the 1/8

Just to give some perspective.

[Jime]

Originally Posted by Danger Dude

well with a 150 shot of nitrous you were near 300 or maybe even over and then there is he weight issue. But good runs anyway

Less than a 100 lbs diff in weight. Stock Maxima's are over 3000 lbs.

[Brent]

Stock V6 Mustangs are wha? 3600?

[Jime]

Originally Posted by Brent

Stock V6 Mustangs are wha? 3600?

5 speed V6 Mustang = 3071
5 speed V6 Maxima = 3014

I would say that was pretty close.

[Danger Dude]

well My friends stock 2000 GT with the exception of a x pipe and exhaust, CAI and gears he ran a 8.999


what year Maxima and how much stock HP

[Rellik]

My best 1/8th is 10.595.

Good job there Corey. It kinda sucks that I would have to get your entire mod list to get down another 4 thenths though

[Danger Dude]

Listen I am not fully tuned still!!! It is running better and not as rich but I still have issues. I would like to be like 9.5-9.7 N/A.

[Jime]

Originally Posted by Danger Dude

well My friends stock 2000 GT with the exception of a x pipe and exhaust, CAI and gears he ran a 8.999


what year Maxima and how much stock HP

95 Maxima V6 3.0L, 190 HP stock.

HP and weight are very very similar between the Mustang and Maxima.

My mods and timeslips are listed here:

http://www.maxima.org/forums/showthread.php?t=218852

I am going to juice a 2003 3.8 Mustang on Sat, put a CAI on it and see how it does on Sunday at the Sport Compact Races.

[Monkey]

Originally Posted by v6stanger

My 13.4 was an 8.4 in the 1/4 mile

My 15.0 was a 9.6 in the 1/8

Just to give some perspective.

yeah, my 15.2 was a 9.7 in the 1/8th N/A. get tuned corey, cause those times could be a heck of a lot better

[Danger Dude]

I know I know remember it was my first time on a track in 3 years and I only had 1 pass!!!I know I could have gotten a little more out of it

[v6stanger]

Corey Get Tuned don't let my big ol' 454 SS beat ya with a 9.7 1/8

[Danger Dude]

HAHHAHHHAHAHAH you are right Zach I cant let that happen

[v6stanger]

lets see if the old school can beat the new school drivers. Don't be like my old man.

He ran 15.8 in the truck and I ran 15.4 Then I ran 14.3 in the 5.0 and he ran 15.5

You elderly fellas got to hold it down a little better

[Danger Dude]

Zach I am not called Danger Dude because I back down!!!! I was racing Bikes , cars and boats before you were Sperm cells !!!!!!!!! MUHAHAHHAHAHAHHAHHA

[01mineralgrey6]

My first car was an '88 nissan pulsar, with a sohc 1.6L, putting out an amazing 65 horsepower, and 109 ft lbs. of torque . It ran about a 14sec 1/8 once.I think that car would probably run with hummer. I was so ashamed. I did have one helluva burnout though. I love that smell

[GSRGuy18]

I run 9.7s @ 74+mph, so you SHOULD beat me

[MusclesFromBrussels]

LOL not bad corey we all know ur car can run better so none of us r really gonna say anything just yet. My "old school" buddies ones 39 and the other is 54 years old who r helping me with my stang. Have a yellow Chevy monza that ran a 7.4 in the 1/8th