Re: How to Flush the Clutch Fluid on an 07
I need to flush the hydraulic fluid in the clutch not the transmission. Th 07 V6 has the Tremec T5, probably the worst trans ever put in a mustang. I'm having problems with the clutch which is hydraulic. There is no cable. It has a slave cylendar that works as the through out bearing. Can't get to it unless you drop the transmission. There is no bleeder valve anywhere within the system. They only way to 'Bleed" the system is to use a vacuum pump on the resivoir. I tried disconnecting the line going into the slave cylendar, letting all the fluid drain, flush the resavoir with brake cleaner, then bled the brakes and used the vacuum pump. I had a little clutch last night this morning no clutch. I'll try the vacuum pump again tonight but not opptumistic. I shouldn't have to replace the slave cylendar after 10k miles, but anyone who's had or driven an 07 will agree the T5's suck.
Mom's - 2007 V6, 5 Speed, Dual Exhaust, CAI, 8.8 with 3.73 gears, Stage 2 Clutch
1965 351C Dragcar Restoration in progress,
1966 289 Pony Restoration in progress
Son's - 2003 V6 4.3L Stroker with lots of goodies,
1965 Dragcar in progress,
1965 Restomod in progress