New M112 Adapter Kit - Mustang Evolution

Go Back   Mustang Evolution > 4 Cylinder | V6 | Classic Mustangs || Tech and Talk > Pre-2005 V6 Mustang



Reply
 
Thread Tools Search this Thread
Please support our sponsors and let them know you heard about them here!
Old 11-25-2007, 07:19 PM   #1
Registered Member
Regular
 
Ibanezplayer272's Avatar
 
Join Date: May 2004
Region: Florida
Posts: 292
Send a message via AIM to Ibanezplayer272 Send a message via MSN to Ibanezplayer272
New M112 Adapter Kit

If some of you haven't heard, Super Six Motorsports fabricated a M112 Adapter kit (M112 = Stock Eaton Cobra blower) for the 3.8. They are charging about $900 but thats a pretty good deal. You pay $900 buy a M112 off of ebay for $500 couple other little things and for $1500 you have yourself a twin screw blown V6. And on top of that, they said that any blower that is capable of going onto A cobra motor is capable with this kit, Kenne Bell, Whipple. etc. Now its time to start building a motor because the 3.8's are finally starting to get recognized!

Super Six Motorsports
__________________

2007 Windveil Blue Mustang GT
Mods : Intake, Stubby antenna
Rolls are for fat chicks
Ibanezplayer272 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 11-25-2007, 07:34 PM   #2
Registered User
Regular
 
Brent's Avatar
 
Join Date: May 2003
Region: Tennessee
Posts: 11,873
Re: New M112 Adapter Kit

lol a Kenne Bell 3.8 would be ridiculous
__________________

Reddit
Brent is offline   Reply With Quote
Old 11-25-2007, 07:56 PM   #3
Moderator Emeritus
Legacy
Regular
 
SpectorV's Avatar
 
Join Date: May 2003
Region: Alabama
Posts: 26,049
Send a message via AIM to SpectorV
Re: New M112 Adapter Kit

by the time you are done you will have over 2k in the setup... and your hp/tq wont be super impressive. I would save up more and go with a single turbo. Make more power.
__________________
2003 Cobra Vert (Redfire) #3938 of 5082 @ 05/27/2003
472rwhp/493rwtq -Modification List - Dyno Sheet
2012 Mustang 3.7L M6 (Kona Blue)
2011 Ford Edge Sport (Red Metallic)
SpectorV is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 11-25-2007, 09:10 PM   #4
Registered Member
Regular
 
Join Date: Jul 2007
Region: Missouri
Posts: 87
Re: New M112 Adapter Kit

Does anyone have any numbers on what this would put out? HP/TQ?
fasternu_674 is offline   Reply With Quote
Old 11-25-2007, 10:11 PM   #5
15.3 Second V8 Killer Yo
Legacy
Regular
 
PureVenom's Avatar
 
Join Date: Aug 2004
Region: Louisiana
Posts: 7,212
Send a message via AIM to PureVenom Send a message via MSN to PureVenom Send a message via Yahoo to PureVenom
Re: New M112 Adapter Kit

There is a website dedicated to this type of swap...it is called mini terminators I believe.

In regards to the KB's going on there, I think the current offerings would be too much for a 3.8...hell, the 2.8L KB is too much for stock 4.6 blocks let alone a 3.8. Hell, the 2.6L KB (smallest offered for the cobras now) is 2/3 the displacement of the motor.

The stock cobra eatons are going for 3-400 in unported form right now. That is prolly the best bet because you can't spin the **** out of them...and if you don't spin the hell out of the current twin screws (KB and whipple), you aren't going to get the full benefits of spending 3k.

Now, if you build a 4.2/4.3...and gind a way to intercool the setup (haven't checked the link, maybe the adapter allows an intercooler), then you could go with a 2.3L whipple or find a used 2.2 kb (but not before I get one...save it for me )...and spin the house down with it and you will kill any turbo numbers spec was refering to.
__________________
"When I know more, I'll be forthcoming. Or I won't be forthcoming, and I'll be honestly deceptive." - Les Miles
PureVenom is offline   Reply With Quote
Old 11-25-2007, 10:52 PM   #6
Registered Member
Regular
 
Join Date: Apr 2005
Posts: 1,834
Re: New M112 Adapter Kit

i will have a kb powered 4.3 stroker before its over...........


i'll just order that kit when i order the 4.3 so i can pick it up all assembled and whole...........then swap the blower
Kyle is offline   Reply With Quote
Old 11-26-2007, 01:43 AM   #7
Legacy Member
Legacy
 
Thomas91169's Avatar
 
Join Date: Sep 2003
Region: California
Posts: 2,280
Send a message via AIM to Thomas91169
Re: New M112 Adapter Kit

Quote:
Originally Posted by PureVenom View Post

In regards to the KB's going on there, I think the current offerings would be too much for a 3.8...hell, the 2.8L KB is too much for stock 4.6 blocks let alone a 3.8. Hell, the 2.6L KB (smallest offered for the cobras now) is 2/3 the displacement of the motor.

The stock cobra eatons are going for 3-400 in unported form right now. That is prolly the best bet because you can't spin the **** out of them...and if you don't spin the hell out of the current twin screws (KB and whipple), you aren't going to get the full benefits of spending 3k.
even stock boost levels are just about the limits for a stock V6/GT rotating assembly. whats the stock pulley size, like 3.25" and puts around 11psi? i think that alone is about as much as the stock rotating assemblies will take, especially with a roots type SC.

hell, with a built motor, you would still be pretty good with just going to smaller pulleys and perhaps a ported eaton. on a stroker setup then you might be better off going bigger with a small KB or Whipple, however if you want big power and have the means to build a setup to handle it, you might as well not waste your money on inefficient roots blowers and strap down twins and make even more power at less boost levels. unless you really like the whine.
__________________
-Thomas-

1998 Eclipse GST Spyder - 14b turbo | 3" Catback | Evo8 BoV | 170fwhp if that

2003 Redfire Cobra - 448whp/435wtq - Sold
Thomas91169 is offline   Reply With Quote
Old 11-28-2007, 09:16 AM   #8
Legacy Member
Legacy
 
DarkShadow's Avatar
 
Join Date: Aug 2005
Region: New Jersey
Posts: 1,734
Send a message via AIM to DarkShadow
Re: New M112 Adapter Kit

I never understood the desire on this set up, always seemed to big for the 3.8 to me.
__________________
DarkShadow is offline   Reply With Quote
Old 11-28-2007, 09:26 AM   #9
Legacy Member
Legacy
 
Kiljosh's Avatar
 
Join Date: Oct 2004
Region: Pennsylvania
Posts: 1,282
Send a message via AIM to Kiljosh
Re: New M112 Adapter Kit

I think it's just for the ability to say "I have a cobra blower on my 6."
That and people fall in love with the whine when you hear one in person.
__________________
Kiljosh is offline   Reply With Quote
Old 11-28-2007, 09:43 AM   #10
15.3 Second V8 Killer Yo
Legacy
Regular
 
PureVenom's Avatar
 
Join Date: Aug 2004
Region: Louisiana
Posts: 7,212
Send a message via AIM to PureVenom Send a message via MSN to PureVenom Send a message via Yahoo to PureVenom
Re: New M112 Adapter Kit

Quote:
Originally Posted by Kiljosh View Post
I think it's just for the ability to say "I have a cobra blower on my 6."
That and people fall in love with the whine when you hear one in person.
I think is the biggest reason right there. Nothing beats the whine....the only thing better is the whine of a KB2.2L....that is just pure sex.
__________________
"When I know more, I'll be forthcoming. Or I won't be forthcoming, and I'll be honestly deceptive." - Les Miles
PureVenom is offline   Reply With Quote
Old 11-28-2007, 09:47 AM   #11
Legacy Member
Legacy
 
Kiljosh's Avatar
 
Join Date: Oct 2004
Region: Pennsylvania
Posts: 1,282
Send a message via AIM to Kiljosh
Re: New M112 Adapter Kit

You never forget your first whine.

Ahhh mustang Week 06....Ill never forget standing on that curb and watching cobra after cobra rip out of that lot down the road, hearing all whine when they come at you, and all snarly v8 when theyre past you.
__________________
Kiljosh is offline   Reply With Quote
Old 11-28-2007, 08:51 PM   #12
Moderator Emeritus
Legacy
Regular
 
SpectorV's Avatar
 
Join Date: May 2003
Region: Alabama
Posts: 26,049
Send a message via AIM to SpectorV
Re: New M112 Adapter Kit

yea i love the blower sound, some hate it... and want it gone... I love it.
__________________
2003 Cobra Vert (Redfire) #3938 of 5082 @ 05/27/2003
472rwhp/493rwtq -Modification List - Dyno Sheet
2012 Mustang 3.7L M6 (Kona Blue)
2011 Ford Edge Sport (Red Metallic)
SpectorV is offline   Reply With Quote
Old 11-29-2007, 11:17 AM   #13
Legacy Member
Legacy
 
Thomas91169's Avatar
 
Join Date: Sep 2003
Region: California
Posts: 2,280
Send a message via AIM to Thomas91169
Re: New M112 Adapter Kit

its cool, though a KB whine is alot better than the Eaton whine.
__________________
-Thomas-

1998 Eclipse GST Spyder - 14b turbo | 3" Catback | Evo8 BoV | 170fwhp if that

2003 Redfire Cobra - 448whp/435wtq - Sold
Thomas91169 is offline   Reply With Quote
Old 12-04-2007, 03:11 PM   #14
Registered Member
Regular
 
Join Date: Jul 2007
Region: Missouri
Posts: 87
Re: New M112 Adapter Kit

No numbers? Anyone have any more info other than the fact that you strap on a cobra blower? I am looking to super/turbo my car and I need to figure out some good numbers on the setups.
fasternu_674 is offline   Reply With Quote
Reply

Lower Navigation
Go Back   Mustang Evolution > 4 Cylinder | V6 | Classic Mustangs || Tech and Talk > Pre-2005 V6 Mustang

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Complete M112 setup 19Delta Mustang Parts for Sale and Wanted 15 05-31-2010 05:14 AM
m112 supercharger Jordan Pre-2005 V6 Mustang 50 04-14-2010 04:10 PM
3.8 vs 4.0 (both with m112) power wise?? blownranger Pre-2005 V6 Mustang 66 03-05-2010 02:39 PM
m112 Question weston Pre-2005 V6 Mustang 19 11-26-2008 01:27 PM
M112 Adapter sonicpony03 Pre-2005 V6 Mustang 5 12-16-2007 07:41 PM

» Like Us On Facebook



04:12 AM


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0

MustangEvolution.com is in no way associated with or endorsed by Ford Motor Company.