5 sp or auto ?? look on the driver's side of the tranny extension housing
Slide under the vehicle and locate the speed sensor. On a Ford transmission, the sensor is located on the driver side of the transmission, toward the rear of the unit. The sensor is a magnetic unit that screws into the transmission and has an electrical connector plugged into it.
Remove the electrical connector. Depress the release tabs on the sides of the connector and pull the connector away from the sensor. The sensor can now be removed. Twist and loosen the sensor from the transmission with a wrench. Remove the sensor by pulling it straight out of the transmission.
Install the new speed sensor. Place the sensor into the appropriate spot on the transmission. Secure the sensor by twisting it clockwise with the wrench until the sensor cannot be twisted any more. Plug the electrical connector into the new sensor until it clicks into place.
Mods-K&N CAI , True Dual Flowmaster 40, BBK Ceramic Shorties, 3.73 , 25% UDP, 3/8 Phenolic Intake Spacer ,Steeda Tri-ax, SCT Chip/Dyno Tune
"Some people are like Slinkies; useless, but fun to push down the stairs."