So I'm wanting to put foglights in my 02 v6 I have the foglights mounted in the bumper already and I got the foglights for near the shifter , put that in and there's a wiring plug type thing In there, So my question is how. Do I get it where I can have my fogs turn on and off from that switch, and I know I can wire them to ambers but I want the setup like it would be Comin out of factory
I(f you do not get an answer here just post in the v-8 section. The v-8s came with fog lights from the factory.
new engine,1.7 rocker arms,Pipes exhaust, shorty cats , shorty headers,under drive and overdrive pulleys,4.2 upper plenum, throttle body spacer, cold air intake, stage one clutch, shorty shifter, and tune. 8.8 in storage
If you're in a state like Virginia, hooking them up with just a toggle switch will not pass inspection. Been there done that with a previous car. You'll either have to remove them or connect them to the headlights. Check your local laws.
You don't need a light relay
I have my light wired together and connected them to the light relay cable which is the black/white one
Then connect power to light dimmer/illumination wires (I have power directly from the battery)
Black to black ground