Update! - Mustang Evolution

Go Back   Mustang Evolution > 4 Cylinder | V6 | Classic Mustangs || Tech and Talk > Pre-2005 V6 Mustang



Reply
 
Thread Tools Search this Thread
Please support our sponsors and let them know you heard about them here!
Old 09-08-2004, 11:37 AM   #1
Registered Member
Regular
 
Join Date: Aug 2003
Region: Texas
Posts: 168
Send a message via Yahoo to 98GreenStallion
Update!

Howdy, I thought I would drop by and update yall on my project. As yall prolly know im doing a top end swap by RPM! Heres a list of the mods going on in a few weeks (hopefully):

RPM BV heads w/all machine work etc
Cut and weld upper intake (plenum cut and raised to match throttle body)
Lower intake
216/225 Cam
60mm throttle body
Timing chain set
adj harland sharp RR's *edit* (foregot to put these!)

190lph holley fuel pump (already installed)
bbk adj fuel regulator
24# injectors

autolite copper core plugs
MSD wires
SCT chip

CAI (installed)
25% UDP (installed)
True 2.25 duals w/spintech pros (insatlled)

All the parts that arent already installed will be installed all at once by me
Mik is just about done with everything, so I should be recieving my parts perdy soon!

I got a dyno a few weeks ago.

Max power: 140.5
Max torque: 208.9

Thats just with boltons and the pump, otherwise stock.

I will be getting another dyno when the parts are on and running! Hoping for another 100 or so hp/torque outta the new setup!

Later!
__________________
http://images.cardomain.com/member_i.../402003_35.jpg

Mods: BV heads, cut and weld upper, fully ported lower, 216/225 cam, 1.73 RR's, 60mm TB, 19# injectors, new timing set, 25% UDP, CAI, SCT chip, PCV delete, EGR delete, MAC LT headers, O/R H-pipe, durablack cat-back...

www.rpm-mustangs.com

RDmotorsport

New dyno
193.8rwhp/238.9 rwtq
98GreenStallion is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 09-08-2004, 11:39 AM   #2
Registered User
Regular
 
Brent's Avatar
 
Join Date: May 2003
Region: Tennessee
Posts: 11,873
Quote:
Originally Posted by 98GreenStallion
Howdy, I thought I would drop by and update yall on my project. As yall prolly know im doing a top end swap by RPM! Heres a list of the mods going on in a few weeks (hopefully):

RPM BV heads w/all machine work etc
Cut and weld upper intake (plenum cut and raised to match throttle body)
Lower intake
216/225 Cam
60mm throttle body
Timing chain set
bbk valve covers

190lph holley fuel pump (already installed)
bbk adj fuel regulator
24# injectors

autolite copper core plugs
MSD wires
SCT chip

CAI (installed)
25% UDP (installed)
True 2.25 duals w/spintech pros (insatlled)

All the parts that arent already installed will be installed all at once by me
Mik is just about done with everything, so I should be recieving my parts perdy soon!

I got a dyno a few weeks ago.

Max power: 140.5
Max torque: 208.9

Thats just with boltons and the pump, otherwise stock.

I will be getting another dyno when the parts are on and running! Hoping for another 100 or so hp/torque outta the new setup!

Later!
Cool keep us updated
__________________

Reddit
Brent is offline   Reply With Quote
Old 09-08-2004, 02:09 PM   #3
Legacy Member
Legacy
 
97Stallion's Avatar
 
Join Date: Nov 2003
Region: Missouri
Posts: 1,461
Send a message via AIM to 97Stallion Send a message via MSN to 97Stallion
I would can the 24# injectors for some 19#ers instead. I've got way more done than what you listed and my 19#ers are exactly what i need. Otherewise you'll need some major tuning to lean out your overly rich mixture. With the 24# injectors you'll be running about 10:1.
__________________

60' ~ 2.1, 1/8 ~ 9.61 @ 73.4mph
Living one day at a time!

DAMN Those are some old *** numbers!!! I need updated ones!!
97Stallion is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 09-08-2004, 02:17 PM   #4
Legacy Member
Legacy
 
Danger Dude's Avatar
 
Join Date: May 2003
Region: South Carolina
Posts: 5,187
Send a message via AIM to Danger Dude
I am in agreement with Rob get some 19#
__________________
Danger Dude is offline   Reply With Quote
Old 09-08-2004, 03:27 PM   #5
Registered User
 
01mineralgrey6's Avatar
 
Join Date: Jun 2003
Region: Florida
Posts: 1,715
Send a message via AIM to 01mineralgrey6
Sweet, definately keep us posted
__________________
-Tony
'99 cobra 'vert
01mineralgrey6 is offline   Reply With Quote
Old 09-09-2004, 08:05 AM   #6
Registered Member
Regular
 
Join Date: Aug 2003
Region: Texas
Posts: 168
Send a message via Yahoo to 98GreenStallion
Quote:
Originally Posted by Danger Dude
I am in agreement with Rob get some 19#
Are yall sure? Cause Mik seems to favor the 24# with my setup?

LAst I heard my heads were being flowed last weekend. That and ordering my cam and welding my upper back together. That was a week ago so everything should be about ready to ship this week I hope...

Do yall think the SCT chip will tune me up good??
__________________
http://images.cardomain.com/member_i.../402003_35.jpg

Mods: BV heads, cut and weld upper, fully ported lower, 216/225 cam, 1.73 RR's, 60mm TB, 19# injectors, new timing set, 25% UDP, CAI, SCT chip, PCV delete, EGR delete, MAC LT headers, O/R H-pipe, durablack cat-back...

www.rpm-mustangs.com

RDmotorsport

New dyno
193.8rwhp/238.9 rwtq
98GreenStallion is offline   Reply With Quote
Old 09-09-2004, 11:51 AM   #7
Moderator Emeritus
Legacy
Regular
 
SpectorV's Avatar
 
Join Date: May 2003
Region: Alabama
Posts: 26,049
Send a message via AIM to SpectorV
what are the stock injectors for 01's i am sure they will be enough for ported and polished heads/intakes/ and a cam with just bolt ons, set up for 3.8 n/a...wouldnt they?
__________________
2003 Cobra Vert (Redfire) #3938 of 5082 @ 05/27/2003
472rwhp/493rwtq -Modification List - Dyno Sheet
2012 Mustang 3.7L M6 (Kona Blue)
2011 Ford Edge Sport (Red Metallic)
SpectorV is offline   Reply With Quote
Old 09-09-2004, 12:50 PM   #8
Legacy Member
Legacy
 
Danger Dude's Avatar
 
Join Date: May 2003
Region: South Carolina
Posts: 5,187
Send a message via AIM to Danger Dude
Quote:
Originally Posted by 98GreenStallion
Are yall sure? Cause Mik seems to favor the 24# with my setup?

LAst I heard my heads were being flowed last weekend. That and ordering my cam and welding my upper back together. That was a week ago so everything should be about ready to ship this week I hope...

Do yall think the SCT chip will tune me up good??
I am running 19#, with 24# you better be getting a tune soon after BY GOD
__________________
Danger Dude is offline   Reply With Quote
Old 09-10-2004, 08:04 AM   #9
Registered Member
Regular
 
Join Date: Aug 2003
Region: Texas
Posts: 168
Send a message via Yahoo to 98GreenStallion
Quote:
Originally Posted by Danger Dude
I am running 19#, with 24# you better be getting a tune soon after BY GOD
Im buying a SCT chip from rpm that will be coming in the same time as everything else. That should do the job, but I think with BV's 24# injectors would be better for performance, with the chip of course. Without the chip, my car woulnt run very well after****s...
__________________
http://images.cardomain.com/member_i.../402003_35.jpg

Mods: BV heads, cut and weld upper, fully ported lower, 216/225 cam, 1.73 RR's, 60mm TB, 19# injectors, new timing set, 25% UDP, CAI, SCT chip, PCV delete, EGR delete, MAC LT headers, O/R H-pipe, durablack cat-back...

www.rpm-mustangs.com

RDmotorsport

New dyno
193.8rwhp/238.9 rwtq
98GreenStallion is offline   Reply With Quote
Old 09-10-2004, 08:20 AM   #10
Legacy Member
Legacy
 
Danger Dude's Avatar
 
Join Date: May 2003
Region: South Carolina
Posts: 5,187
Send a message via AIM to Danger Dude
Quote:
Originally Posted by 98GreenStallion
Im buying a SCT chip from rpm that will be coming in the same time as everything else. That should do the job, but I think with BV's 24# injectors would be better for performance, with the chip of course. Without the chip, my car woulnt run very well after****s...
Actually it wont make any difference. The 19# and the 24# injectors can deliver more fuel than the car needs. All injectors do is deliver fuel. There is no added benefits to having larger than necessary injectors.


So no there will be no better or worse performance between the 2 on a Single port engine.
__________________
Danger Dude is offline   Reply With Quote
Old 09-10-2004, 10:39 AM   #11
Legacy Member
Legacy
 
97Stallion's Avatar
 
Join Date: Nov 2003
Region: Missouri
Posts: 1,461
Send a message via AIM to 97Stallion Send a message via MSN to 97Stallion
Quote:
Originally Posted by 98GreenStallion
Im buying a SCT chip from rpm that will be coming in the same time as everything else. That should do the job, but I think with BV's 24# injectors would be better for performance, with the chip of course. Without the chip, my car woulnt run very well after****s...
Also, the reason I wouldn't get 24# injectors is because they're an overkill for your setup and you'll require more tuning to get your setup to run right. You can get just about any injector to run with any setup, but your have to tune for that and I personally would like an injector that I only have to fine tune. With larger injectors you have to start off in left field and where you wanna be is at home plate. And since I'm on the anologies, 19# injectors would atleast start you on the pitcher's mound. I'm just trying to help you out and no disrespect to Mik, but a mail order chip is not the best way to go about it. Dyno tuning is really the only way to do this.
__________________

60' ~ 2.1, 1/8 ~ 9.61 @ 73.4mph
Living one day at a time!

DAMN Those are some old *** numbers!!! I need updated ones!!
97Stallion is offline   Reply With Quote
Old 09-10-2004, 12:11 PM   #12
Legacy Member
Legacy
 
Danger Dude's Avatar
 
Join Date: May 2003
Region: South Carolina
Posts: 5,187
Send a message via AIM to Danger Dude
Quote:
Originally Posted by 97Stallion
Also, the reason I wouldn't get 24# injectors is because they're an overkill for your setup and you'll require more tuning to get your setup to run right. You can get just about any injector to run with any setup, but your have to tune for that and I personally would like an injector that I only have to fine tune. With larger injectors you have to start off in left field and where you wanna be is at home plate. And since I'm on the anologies, 19# injectors would atleast start you on the pitcher's mound. I'm just trying to help you out and no disrespect to Mik, but a mail order chip is not the best way to go about it. Dyno tuning is really the only way to do this.
total agreement
__________________
Danger Dude is offline   Reply With Quote
Old 09-10-2004, 12:46 PM   #13
Legacy Member
Legacy
 
97Stallion's Avatar
 
Join Date: Nov 2003
Region: Missouri
Posts: 1,461
Send a message via AIM to 97Stallion Send a message via MSN to 97Stallion
Quote:
Originally Posted by Danger Dude
total agreement
I'm glad you agree Corey!!

But 98GreenStallion, as you can see Corey and I are in total agreement with each other and I would have to say we're probably the two most experienced people on the site. So just do what we say or it's off with your head.
__________________

60' ~ 2.1, 1/8 ~ 9.61 @ 73.4mph
Living one day at a time!

DAMN Those are some old *** numbers!!! I need updated ones!!
97Stallion is offline   Reply With Quote
Old 09-16-2004, 09:59 PM   #14
Registered User
Newbie
 
OrangeV6F150's Avatar
 
Join Date: Sep 2004
Posts: 3
Good to hear yours are almost done I sent my heads and a cam in to Mik and he is working his magic with them.He already did my upper and lower intakes.Still waiting on the heads/cam, the machine shop messed up my heads and he is waiting for the previous guy to send his cores back..this sucks.

I have an extra set of 19lbs injectors from a 4.2l if your interested?
OrangeV6F150 is offline   Reply With Quote
Reply

Lower Navigation
Go Back   Mustang Evolution > 4 Cylinder | V6 | Classic Mustangs || Tech and Talk > Pre-2005 V6 Mustang

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Update to the update!!!!! Zebs5408 Pre-2005 V6 Mustang 19 01-29-2010 10:55 PM
Update SaturnMan8227 Pre-2005 V6 Mustang 2 03-20-2009 12:58 PM
Update silverstangboy 1979-1995 Mustang GT 14 12-27-2006 08:36 PM
Zim - update Monkey The Bar 7 05-22-2005 09:58 PM
S-10 update Smokedawg The Bar 8 03-07-2004 09:08 PM

» Like Us On Facebook



11:11 AM


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0

MustangEvolution.com is in no way associated with or endorsed by Ford Motor Company.