Re: how to hide under hood wiring
I'm with these guys. I seen an article on the internet about it. To begin with, take the big main harness that runs along the firewall and push it under the pinch weld. That will make a big step in cleaning up the firewall area. (The pinch weld is the big lip where two parts of the firewall come together. They are literally "pinched" together.
From that point on it's take off the front wheels, remove plastic fender linings, and look for places to poke wires outside of the engine compartment. Be careful if you extend wires...which you will have to. Not all of them like to be patched and you should use some of the more sophisticated heat joints.
It's time consuming but worth it. Especially if you weld up the zillion holes, smooth and repaint under the hood.
Jim Wyche:Senior Citizen. 1992 Mustang GT with a few mods. See webpage http://web.mac.com/jwyche
or my garage. 2002 Mustang GT with a few mods. Collegedale, Tennessee.