Mustang Evolution Forum banner

Oil plug

18K views 6 replies 3 participants last post by  Brandon91 
#1 ·
Changed my oil, was putting the plug back in and felt it strip. I bought a new one and it went In fine. There a day later the was a spot of oil on re ground and a drip from the plug.. Any thoughts?
 
#3 ·
Changed my oil, was putting the plug back in and felt it strip. I bought a new one and it went In fine. There a day later the was a spot of oil on re ground and a drip from the plug.. Any thoughts?
Go to the parts store and get the oversized plug kit for 1/2"x20 thd plug hole.
 
#5 · (Edited)
For some reason my plug is not the standard size.. It's M 12.25. Should I go with 12.50?
Then you may already have an oversized plug, which is not a good thing.
See if they have an oversize listed for the size you have.
I'm not sure if the M12.50 will be right or not.
The next size up in SAE thd is 9/16" x 18 THD.

OIL DRAIN PLUGS
 
#6 ·
Oil Pan Plug Info:
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top