Originally Posted by Stang89
Sence you all know what happened to my other setup. I'm thinking of going with a stock 5.0 block and boring it 0.30 over. Has any one had a 306. I want to go with stock crank and rods. Summit racing has a kit with 30 over pistons and rings and the gasket kit is included with it. While it's getting bore I'm going to have the crank polished. I'm hoping for high 12 secs next year at NMRA. With. 306 gt-40 heads new intake don't know which one yet. And 24lb injectors and a bigger maf sensor. Any other suggestions.
Mine ran 12.50's at its last outing a few years ago
306 Keith Craft shortblock w/forged pistons (9.5:1 CR) and H-Beam rods, cast steel crankshaft, Edelbrock RPM heads, BBK Equal length shorties and Flowmaster 2.5" exhaust/H-Pipe, Cobra port matched intake, 24 lb. injectors, 75MM MAF, 65MM TB, K&N Cone Filter, 190LPH fuel pump, X-303 cam, Roller Rocker arms....