Originally Posted by jhagan1980
The flywheel is smooth to the touch but looks to have blue spots. Will resurfacing correct this? The only chips I could find on the disc is the ones in the pics. The pressure plate has blue spots as well. If it needs to be replaced so be it. Looking for opinions.
Yes, resurfacing will remove the marks and give you a flat fresh surface to start with.
The flywheel looks like it needs to be resurfaced.
It looks grooved around the circumference?
The clutch disk itself looks ok. The small chips around the edges are normal and will not hurt anything.
The pressure plate looks pretty good.
If you have a D/A Sander and some 60-80 grit paper for it, it wouldn't hurt to sand it down a bit to remove any minute chatter marks or waves in the surface of the pressure plate contact disk.
Just get the D/A started and keep it moving around the disk, don't stay in one place.