Originally Posted by jacob.a.gasparp
What exactly would someone use to take off and put back on the plastic if its glued? Like the skirting on my car where it says mustang seems to have come undone at the top or has just warped that way and i want to fix that too.
You can use piano wire if you are very careful.Get it started behind the trim piece and use a sawing motion to cut through the double sided tape. A short stick or dowel rod on each end of the wire helps immensely.
Also a heat gun can be used for pieces that you can't get a wire behind, but you have to be careful not to melt or warp the plastic too.