i need help

[frankie1993]

I got a 1993 mustang used to be four cylinder converted it to a 5.0 it died on me a couple days ago it was blowing black smoke and ran for 3 mins and died never started back so I figured I'd change tha intake all tha senssors I've changed to computer I've changed everything distributor coil everything but still no fire to my injectors can some please help

---------- Post added at 09:59 AM ---------- Previous post was at 09:57 AM ----------

and I changed tha feul.pressure regulator put 24 pound injectors and maf on it idk wat tha problem is

[McNassty]

Timing?

[frankie1993]

but I'm not getting pulse to.my injectors

[dreamstang]

Pip or tfi module?

---------- Post added at 11:18 AM ---------- Previous post was at 11:16 AM ----------

Did those come with the new distributor? Also check the wiring for those parts and engine grounds.

[frankie1993]

brand new ditributor

---------- Post added at 10:14 AM ---------- Previous post was at 10:12 AM ----------

it will.start wit either immediately just no injector.pulse new computer new relays evertythkng is new besides tha hiring harness

[dreamstang]

Check the connections on the salt and pepper shakers.

Or the pip.if its the pip try unplugging the spout and see if it works.

[frankie1993]

no power to.my black plug

---------- Post added at 01:33 PM ---------- Previous post was at 12:55 PM ----------

do I need a nnew wiring harness or is there a rely or fuseable link anywhere

[dreamstang]

I think that plug gets its power from the Ecm. Those plugs have been known to go bad.make sure the wires aren't damaged, and and all the pins are in the plug correctly and clean.