get a friend to help you keep the chin spoiler centered good, then just drill the holes, it probably wont line up perfectly side to side so DONT lien up one end of it and start and go all the way around.. cuz you will have a gap at the other end when you are done, so center it up first and maybe use a little tape to hold it in place along with a friends help.
the chin spoiler is easy, the hard part is getting the stock honeycomb off, you can take the front bumper off to make it alot easier... but you can also remove the two push pins in the middle between the head lights facing up and then bent the bumper back and reach under to the underside of the stock grill and remove the 4 bolts you will fee, then the stock grill comes out.
after that you can pull out the little place part behind this, (two push pins you need to pull out, look at the new peice to see where they are) then slide the new peice in place and use the two new push pins that it has that are currently holding down the radiator cover, they hold down both now.
bolt the horse up, slide the new place bottom peice on with 3m tape to make sure it sits flush, sit it down only after the bumper is back down and has its push pins back in it.
2003 Cobra Vert (Redfire) #3938 of 5082 @ 05/27/2003
472rwhp/493rwtq -Modification List
- Dyno Sheet
2012 Mustang 3.7L M6 (Kona Blue)
2011 Ford Edge Sport (Red Metallic)