you have two bolts that are made into the floor board, at the front of the seat, these take nuts, 15mm, you can see these easy by just sliding your seat backwards, good to get these first i think, then if you slide the seat forward you will see the bolts, which the ends of stick out from under the car, remove those also 15 mm and then the seat comes up and out, for the driver side you will have to tilt it forward and unplug the power, while its out go over it and tq down all the seat bolts to tighten it up.
the day before if you have time spray some penetrator on the bolts to make em come out easy.
2003 Cobra Vert (Redfire) #3938 of 5082 @ 05/27/2003
472rwhp/493rwtq -Modification List
- Dyno Sheet
2012 Mustang 3.7L M6 (Kona Blue)
2011 Ford Edge Sport (Red Metallic)