Re: Painting the inside of any 2005+ headlight
It is not that hard to take them apart and reseal. I've done it to my friends' cars but it is pretty universal. The way I did it was I took the headlight housing off the car and then put it in the oven at about 300 degrees for 10 minutes. I then pulled it open by hand (obviously with gloves) then cleaned out the old sealant and then put on new sealant. I used black RTV silicone on one and clear on the other car, whichever looks better. Not difficult at all
Some show. Some go.
462 rwhp/ 446 ft-lbs