The housing is easy to replace. In the inside of your door there is a little triangular shaped cover where the Mach 1000 tweeters are supposed to go. Pop that off. There are 3 bolts under that.. Take those out and the mirror housing will just come right off.
Pop off the door cup panel. There wil be two screws on the panel. Take them off. Pop the door handle bezel out. It's held on with pressure. Pop out the clip on the inside of the door panel. Can't miss it. It's black. And then push up on the door panel. And unplug the harnesses. Don't forget to take off the sail panel. You, know. That black panel where the MACH 460 Tweeters go.
sure first you take your arm rest panel off where your window controls are. Pop it uff with a screw driver but be careful not to break the connectors
When you have that off you take the door handle bezel off crefully. Now you should see three screws where your arm rest panel was. Take those out. Now from the bottom of the door lift up on the door and it will slide up. Then pull away from you slowly. Then reverse to put back on.
its a pain i've done this before.
Thats how i broke my door armrest thing, so i had to replace it.
How the power switches are connected to the armrest are freaking fragile!
Its like the tiniest plastic thing, and they just stnapped off the armrest when i lifted up on it to unplug, very gay. So watch out when u take if off.
They must have had P.O.S. handle bezels in 95 or something... I've taken both of my doors off like 6 times to fix windows and dynamat and install speakers. It's so simple. And nothing has ever come close to breaking.