Originally Posted by Coleton
I would like to just put them in my existing head lights.
Whole bumper has to come off. There's a top panel in the good that has to come off, has like six pins, then turn the wheels to access two other 10 mm bolts I think, then there's two other 10's way up under the wheel well trim that are a pain in the *** to get to, then underneath there's like 4 7/32 screws, then two more tens on top of the headlights, then the bumper comes off. Then there's two more screws underneath the headlight, both 10's I think, and the headlight comes out. Then bake them for 10 min at I think 250 degrees, (check on temp, I can't remember for sure) and then cut silicone with razor. Then install leds, re silicone , and put everything back.
This was all from memory so i might be missing something.