Hi from Europe
What should I do to my 06 gt, brakes are good about 2 weeks
after bleeding end then them get soft, new mastercyl is in place 1caliper is replaced brakes are good and nothing doesnt look bad, HELP
You need to CAREFULLY inspect the entire system, brake lines, brake hoses, EVERYWHERE that the brake fluid runs through. Look for any signs of seepage or leakage.
Its possible that the brakes weren't bled correctly, so you might try that again if you can't find any obvious signs of anything wrong.
check brake hoses in the front look for bulges if all is good then bleed master cyl by having someone pumping then hold the breaks and loosen brakes lines or if it has bleeder fittings.if there are fittings put a hose on the fitting and catch the fluid in a clear container look at the fluid carefully look for small air bubbles(one at a time front line repeating step one rear line) for a second while holding the brake not allowing the brake to hit the floor.....check the brakes if it does it again you may have air in the caliper you replaced do the same for the caliper......hope this helps