Originally Posted by rwboring
you also have to really pay attention to what kind it is... and all converters are "stall" it just depends on what speed you want it to stall at... i can launch my 65 at like 2750 so that rated speed isnt always a good way to look at it...
PS i have a boss hog night stalker in my C-4 "after ripping the guts out of another one"
..:: Welcome to BOSS HOG - Acc Performance Products ::..
id also reccomend a trans go shift kit... with the 2.80s and the 3.40s it will bark hitting second (with 245 tires on the back)... it hits HARD
thanks! iam not sure what kit is in my trans because it was already built when i got it but my grandmother told the trans shop she wanted it to "break your damn neck when it shifts" and even with the stock 302 in it it will bark the tires at 1/4 throtal 1-2 and if you lay into it it will spin them about 2 to 3 feet in second and bark then in 3rd. anyways the stall is a 2500 satrday night special that my grandpa ordered with the tranny.
but now i have to pull the 351w back out of the 68 stang so I can rebuild it again 500 miles later.
so ill just order a new one to match my set up.