Mustang Evolution Forum banner

TR3650 shifter sticks

2K views 7 replies 6 participants last post by  fenixignition 
#1 ·
Going into 3rd gear sticks and is hard to get In gear anybody have the same issue or know how to fix it??
 
#4 ·
Has the tranny fluid ever been changed? If not drain it and refill with 3.0 L (3.2 qts). This is less than what the owner's manuals says, but exactly what this TSB says.

I had been running RP Synchromax, however have found Mobil 1 ATF to be much smoother. Do not load any additives, Tremec is quite explicit that they should not be used, this is from the TR-3650 service manual:

 
#8 ·
Nice picture. I think I have a squeak around the clutch release lever. Originally thought it was the quadrant but the noise was comin from underneath. Happens usually when I slowly release the clutch pedal. Havent had a chance to pull the dust cover off and check.

Sent from my GT-P3113 using Mustang Evolution mobile app
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top