Well my rear end started whining like 3 months after my gears were installed.
Idk if you guys remember the shop I took it to did them like 5-6 times before messing up my carrier and they had to replace it. And finally they got it right.
Well it's been whining for about 1-3 months now and I finally got sick and tired of it so at work I took the cover off and noticed the shims backed out
So about 3 days ago I took the cover off again at home, and tried taking the bearing caps off and try to push it back in but didn't work so I took the carrier out , ( Remove Pin , Caps , Axles & c clips , Brakes )
And my dad inspected the carrier and everything was fine
Bearing caps had some wear but looked normal , although the shims the idiot used were about like 10 paper thin shims on 1 side , and 1 thick one on the other side, the paper thin ones snapped off in half.
Anyways neither of us are experienced in Differentials at all , we set the ring and carrier in my diff. ALL BY FEEL we used some red grease to see the wear markings. And by some how i put it all together last night and drives very great! No noise!