Use an inline air to water separator (found in the air compressor section usually) from home depot or Harbor freight. You can pick up a 1/4 or a 3/8 depending on the size you want. I used a 1/4, and screwed two 1/4 air hose connectors in them. You'll need to buy some rubber hose, and I connected it between my pcv and the intake. Lastly I poked 5-7 holes in the filter in the separator so air can move more freely through it. Some leave it out, and/or put a brillo sponge in there too. I'll take some pics after work today.
2000 Mustang GT-Former giggle gas addict
1990 Mustang GT w/ Vortech V3
***resident gun idiot***