I'm trying to delete all of the evap system. Both what's up front in the passenger fender well, and under the rear driver side bumper area.
I'm trying to find out how I can vent the tank so I can still fill it since it's got the check valve.
Obviously everything would need to be turned off in the tune.
That's my tank as it sits.
2 lines run to the canister in the rear on the left and three lines come from the filler neck. One obviously being the filler going to the side of the tank.
I'm not concerned with the legality aspect, since it's not a "street car"
I found this on a forum but not sure if it would work. He's got the vent line dumped below the tank and the two lines going to the canister looped together with a hose
04 GT: CAI, 3.73, Longtubes, Full exhaust, Comp Cams 270's, Short throw, Pullies, BBK 73mm TB, MSD coils, 47lb injectors, MPT tuned, Steeda lowering springs, Front strut bar, MM caster camber plates and the list goes on.