Figured I would let you guys in on the Remote programming trick that most dealers charge you at least a 1/2 ($40-$50) Labor rate for.
I do have info on other FORD, LINCOLN, and MERCURY remote programming. So if you need to program a remote I can help you. PM me.
Your remote must look like this:
YOU WILL NEED ALL REMOTES TO VEHICLE WITH YOU TO PROGRAM ALL AT THE SAME TIME!!! MAKE SURE ALL THE BATTERIES ARE GOOD
If you program 1 remote by itself, the others will not work until you do them together!
*KOEO - Key On Engine OFF
*KOER - Key On Engine Running
Put the key into the ignition and turn ON - Accessories are on (KOEO)
Then turn Key OFF (DO NOT GO TO LOCK POSITION)
Do this ATLEAST 8 TIMES in 10 SECONDS
(key on, key off, key on, key off)
After the 8th time the key is turned ON the door locks will LOCK
LEAVE THE KEY ON
THEN PUSH THE LOCK OR UNLOCK BUTTON ON EACH REMOTE AT this time ONE BY ONE.
Once You have pushed each remote button
Turn the key OFF
The Doors WILL UNLOCK!
Test all your remotes!
If you can't get it to work the first or 2nd time you try its ok. IF it NEVER WORKS then you may need another way to program it or have an issue.