Some may have seen my post about my BBK 70mm throttle body. Finally fixed it with a tune. But today's I was racing a F250. And the wrench came on while on the highway and it wouldn't give it any more gas, even with pedal to the metal. Lost all power and wouldn't respond. Car was still on but no gas. No check engine
. Nothing. So I pull over and I turn it off, turn the car back on. It's fine. I get back to base and there's no check engine or wrench. I decide to check the dtc codes anyway. 2 came up. P2104 Throttle actuator control system forced idle and P2112 Throttle Actuator control system stuck closed. Car runs fine now and no check engine. Any suggestions? Help would be appreciated!