2011 Remote (Fob) Programming - Mustang Evolution

Go Back   Mustang Evolution > 4 Cylinder | V6 | Classic Mustangs || Tech and Talk > 2011-2014 V6 Mustang



Reply
 
Thread Tools Search this Thread
Please support our sponsors and let them know you heard about them here!
Old 05-02-2014, 01:32 PM   #1
Staff
Blogger
Staff
 
99ford's Avatar
 
Join Date: Jan 2009
Region: Georgia
Posts: 6,120
Send a message via Skype™ to 99ford
2011 Remote (Fob) Programming

I bought a friend of mine a new key fob. I went to program it today following the steps found in the owners manual, and the computer recognizes the signal, however, it won't stay programmed.

The other keys work, to unlock, lock, and do everything, but this one will not do anything.
__________________
Check out the Official ME gear page for site t-shirts, decals, and bottle openers: http://www.mustangevolution.com/foru...2/#post1670281
99ford is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 05-02-2014, 02:00 PM   #2
Registered Member
Regular
 
Join Date: Apr 2014
Location: Gilbert
Region: Arizona
Posts: 104
2011 Remote (Fob) Programming

Quote:
Originally Posted by 99ford View Post
I bought a friend of mine a new key fob. I went to program it today following the steps found in the owners manual, and the computer recognizes the signal, however, it won't stay programmed.

The other keys work, to unlock, lock, and do everything, but this one will not do anything.

You mean this process..



Also says max of four remotes, not sure if that is the issue or what. Hope it helps.
Batdive is offline   Reply With Quote
Old 05-02-2014, 02:01 PM   #3
Admin

Supporter
Admin
 
bucko's Avatar
 
Join Date: Nov 2012
Location: Lake Mary
Region: Florida
Posts: 5,822
Does this help?

Create a MyKey™
To program MyKey™ on one of the keys programmed to the vehicle,
insert the key that you want to make a MyKey™ into the ignition. For
vehicles equipped with push button start, put the intelligent access key
in the backup slot; see the Driving chapter for the location of the
backup slot. Turn the ignition on. Use the message center buttons to do
the following:
1. Press SETUP until PRESS RESET TO CREATE MYKEY is displayed.
2. Press and release the RESET button. HOLD RESET TO CONFIRM
MYKEY will be displayed.
3. Press and hold the RESET button for two seconds until MARK THIS
AS RESTRICTED is displayed.
4. Wait until KEY RESTRICTED AT NEXT START is displayed.
MyKey™ is successfully programmed.
__________________
It is better to keep your mouth closed and let people think you are a fool than to open it and remove all doubt.
bucko is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 05-02-2014, 02:01 PM   #4
Admin

Supporter
Admin
 
bucko's Avatar
 
Join Date: Nov 2012
Location: Lake Mary
Region: Florida
Posts: 5,822
Does this help?

Programming spare keys
You can program your own integrated keyhead transmitters or standard
SecuriLock coded keys to your vehicle. This procedure will program
both the engine immobilizer key code and the remote entry transmitter
portion of the IKT to your vehicle. Note: A maximum of eight coded
keys can be programmed to your vehicle; only four of these eight can be
IKTs with remote entry functionality.
Tips:
• Only use integrated keyhead transmitters (IKTs) or standard
SecuriLock keys.
• You must have two previously programmed coded keys (keys that
already operate your vehicle’s engine) and the new unprogrammed
key(s) readily accessible.
• If two previously programmed coded keys are not available, you must
take your vehicle to your authorized dealer to have the spare key(s)
programmed.
Please read and understand the
entire procedure before you begin.
1. Insert the first previously
programmed coded key into the
ignition.
2. Turn the ignition from the 1 (off)
position to the 3 (on) position. Keep
the ignition in the 3 (on) position
for at least three seconds, but no
more than 10 seconds.
3. Turn the ignition to the 1 (off) position and remove the first coded
key from the ignition.
4. After three seconds but within 10 seconds of turning the ignition to
the 1 (off) position, insert the second previously coded key into the
ignition.

5. Turn the ignition from the 1 (off) position to the 3 (on) position. Keep
the ignition in the 3 (on) position for at least three seconds, but no more
than 10 seconds.
6. Turn the ignition to the 1 (off) position and remove the second
previously programmed coded key from the ignition.
7. After three seconds but within 20 seconds of turning the ignition to
the 1 (off) position and removing the previously programmed coded
key, insert the new unprogrammed key (new key/valet key) into the
ignition.
8. Turn the ignition from the 1 (off) position to the 3 (on) position. Keep
the ignition in the 3 (on) position for at least six seconds.
9. Remove the newly programmed coded key from the ignition.
If the key has been successfully programmed it will start the vehicle’s
engine and will operate the remote entry system (if the new key is an
integrated keyhead transmitter). The theft indicator light will illuminate
for three seconds and then go out to indicate successful programming.
If the key was not successfully programmed, it will not start your
vehicle’s engine and/or will not operate the remote entry features. The
theft indicator light may flash on and off. Wait 20 seconds and you may
repeat Steps 1 through 8. If failure repeats, bring your vehicle to your
authorized dealer to have the new key(s) programmed.
To program additional new unprogrammed key(s), wait 20 seconds and
then repeat this procedure from Step 1.
__________________
It is better to keep your mouth closed and let people think you are a fool than to open it and remove all doubt.
bucko is offline   Reply With Quote
Old 05-03-2014, 05:43 PM   #5
Staff
Blogger
Staff
 
99ford's Avatar
 
Join Date: Jan 2009
Region: Georgia
Posts: 6,120
Send a message via Skype™ to 99ford
Quote:
Originally Posted by Batdive View Post
You mean this process..



Also says max of four remotes, not sure if that is the issue or what. Hope it helps.

I actually used this guys video.
__________________
Check out the Official ME gear page for site t-shirts, decals, and bottle openers: http://www.mustangevolution.com/foru...2/#post1670281
99ford is offline   Reply With Quote
Old 05-03-2014, 05:48 PM   #6
Staff
Blogger
Staff
 
99ford's Avatar
 
Join Date: Jan 2009
Region: Georgia
Posts: 6,120
Send a message via Skype™ to 99ford
Quote:
Originally Posted by bucko View Post
Does this help?

Programming spare keys
You can program your own integrated keyhead transmitters or standard
SecuriLock coded keys to your vehicle. This procedure will program
both the engine immobilizer key code and the remote entry transmitter
portion of the IKT to your vehicle. Note: A maximum of eight coded
keys can be programmed to your vehicle; only four of these eight can be
IKTs with remote entry functionality.
Tips:
• Only use integrated keyhead transmitters (IKTs) or standard
SecuriLock keys.
• You must have two previously programmed coded keys (keys that
already operate your vehicle’s engine) and the new unprogrammed
key(s) readily accessible.
• If two previously programmed coded keys are not available, you must
take your vehicle to your authorized dealer to have the spare key(s)
programmed.
Please read and understand the
entire procedure before you begin.
1. Insert the first previously
programmed coded key into the
ignition.
2. Turn the ignition from the 1 (off)
position to the 3 (on) position. Keep
the ignition in the 3 (on) position
for at least three seconds, but no
more than 10 seconds.
3. Turn the ignition to the 1 (off) position and remove the first coded
key from the ignition.
4. After three seconds but within 10 seconds of turning the ignition to
the 1 (off) position, insert the second previously coded key into the
ignition.

5. Turn the ignition from the 1 (off) position to the 3 (on) position. Keep
the ignition in the 3 (on) position for at least three seconds, but no more
than 10 seconds.
6. Turn the ignition to the 1 (off) position and remove the second
previously programmed coded key from the ignition.
7. After three seconds but within 20 seconds of turning the ignition to
the 1 (off) position and removing the previously programmed coded
key, insert the new unprogrammed key (new key/valet key) into the
ignition.
8. Turn the ignition from the 1 (off) position to the 3 (on) position. Keep
the ignition in the 3 (on) position for at least six seconds.
9. Remove the newly programmed coded key from the ignition.
If the key has been successfully programmed it will start the vehicle’s
engine and will operate the remote entry system (if the new key is an
integrated keyhead transmitter). The theft indicator light will illuminate
for three seconds and then go out to indicate successful programming.
If the key was not successfully programmed, it will not start your
vehicle’s engine and/or will not operate the remote entry features. The
theft indicator light may flash on and off. Wait 20 seconds and you may
repeat Steps 1 through 8. If failure repeats, bring your vehicle to your
authorized dealer to have the new key(s) programmed.
To program additional new unprogrammed key(s), wait 20 seconds and
then repeat this procedure from Step 1.
I found that after the youtube video. What is weird is it knows the key is there because at the end it honks and the doors lock and unlock. But when I remove the key it acts like "I don't what this is"
__________________
Check out the Official ME gear page for site t-shirts, decals, and bottle openers: http://www.mustangevolution.com/foru...2/#post1670281
99ford is offline   Reply With Quote
Reply

Lower Navigation
Go Back   Mustang Evolution > 4 Cylinder | V6 | Classic Mustangs || Tech and Talk > 2011-2014 V6 Mustang

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Key fob remote 1998 Mustang V6 cor66vette General Mustang Discussion 0 02-06-2014 08:28 AM
Key fob remotes Peterzinyou 1996-2004 Mustang GT 11 04-21-2013 09:52 AM
Key fob problems. Evolution Pre-2005 V6 Mustang 8 03-01-2013 04:05 PM
key fob issues spencerbed 1996-2004 Mustang GT 0 02-24-2013 06:16 PM
Possible to replace dead "fob" battery? RedFire2006 2005-2010 Mustang GT 5 12-31-2009 06:05 AM

» Like Us On Facebook



06:19 AM


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0

MustangEvolution.com is in no way associated with or endorsed by Ford Motor Company.