Mustang Evolution Forum banner

Camera Wiring

1K views 7 replies 3 participants last post by  parkerbickel 
#1 ·
So I have been in the market for a black spoiler. Found one on ebay with back up camera for $75, which is cheap for any spoiler so I got it. My question is, is there anyway to get the spoiler camera to work on my Raxiom unit? Has anyone done this?
 
#4 ·
Just got spoiler and thinking about some options to try. Before I start has anyone bought a oem spoiler for their raxiom and got it to work?

Sent from my SM-G935V using Mustang Evolution mobile app
 
#5 ·
I hooked it up to my Ford Nav, here is the plug you need to go to the camera

Wiring in the plug
The Red wire in the plug is pin 1 and goes to the WH/VT
Pin 3 in the camera plug is black and goes to black/purple
Pin 4 is black and goes to the bare shield wire.
Pin 6 and 7 are the 2 white wires in the camera plug, 6 goes to the WH/GR and 7 goes to Brown/Purple
and what they actually do
Switched 12v - WH-VT = RED Pin 1
Ground - BK-VT = BLACK Pin 3
Video Sheild - = BARE SHEILD - pin 4 (also black)
VIDEO + WH-GN = WHITE Pin 6
Video - BN-VT = WHITE pin 7
 
#6 ·
I have seen the plug and wiring it into a Ford OEM Nav but didn't think the process would be the same for a Raxiom Nav.

Sent from my SM-G935V using Mustang Evolution mobile app
 
#8 ·
I was going to try and splice the svideo cable onto the end of the factory camera but I believe they use different types of transmission. I'm just not sure how to get the video onto the raxiom sm

Sent from my SM-G935V using Mustang Evolution mobile app
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top