Rear suspension clunk - Mustang Evolution

Go Back   Mustang Evolution > 1979-2015 Mustang GT || Tech and Talk > 2011-2014 Mustang GT



Reply
 
Thread Tools Search this Thread
Please support our sponsors and let them know you heard about them here!
Old 09-02-2012, 07:53 PM   #1
Registered Member
Regular
 
CaptainBeyond's Avatar
 
Join Date: Oct 2011
Region: Texas
Posts: 57
Rear suspension clunk

I know there have been alot of threads on this so I apologize. But my car is lowered about 1.5" in the rear and a little over 1 in front. I have h&r race springs, steeda shocks/struts, j&m camber plates and stallion adjustable panhard. I mainly hear the clunking noise when I'm going going under 35 or 40 and driving over bumps. Ive read many threads and the main thing ive found is people saying the rear swaybar link bolts will loosen. But i have been under my car twice and have gone over all the nuts and bolts and havent found anything loose. The exhaust seems to have plenty of clearance. Im not sure what else to check. Only other things i can think of are maybe my stock swaybar and links or possibly the LCAs?? My car has been lowered for a while now and its been making the same noise since i first lowered it. I dont think anything is really wrong, it just annoys me when im cruising around slowly. Hoped maybe i could get some insight. Thanks in advance everyone!
__________________
Life's a garden, dig it
CaptainBeyond is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 09-02-2012, 09:31 PM   #2
Registered Member
Regular
 
Join Date: Jul 2012
Region: Florida
Posts: 441
Re: Rear suspension clunk

double check your exhaust, mine hits in two places
__________________
Boss IM, with Araid cai, bama 93 race tune, GT500 cat back, jba off-road x-pipe & longtubes, mgw shifter,4.10 gears, Aluminum Flywheel & driveshaft, Adjustable Panhard Rod, BMR adj. uca & lca, BMR relo. brackets, BMR Springs with 1.5" drop, BMR adj. swaybar, BMR tubular K member 1/2 drop motor mounts & BMR tubular A arms, steeda alu. rad. support, aluminum water pump pully, 85mm BBK TB, Rear seat delete. Boss oil cooler, Battery in trunk. AC delete, Evap delete
brianw64 is offline   Reply With Quote
Old 09-02-2012, 11:33 PM   #3
Registered Member
Regular
 
Cobrarunnin9s's Avatar
 
Join Date: Apr 2011
Region: Missouri
Posts: 218
Re: Rear suspension clunk

Make sure all your bushing have grease in them, but don't over fill them either. check them for damage as well while your there.
Cobrarunnin9s is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 09-03-2012, 12:17 AM   #4
Evolution's Finest
Supporter
 
TommyV's Avatar
 
Join Date: Jul 2012
Location: La Mesa, Ca
Region: California
Posts: 559
Re: Rear suspension clunk

Check your panhard, mine came loose and was clunking. LocTite and it's fine now.
__________________
'13 5.0 PW Premium / E-Force Supercharger w/ Brenspeed tune / FRPP Recaro's / GT500 quad exhaust / DSS Aluminum / Stop Tech 6P 15" / 13" rears / LP over axels / MGW / Moroso separator / 3:73's / Forgestar F14's 20x9/20x11 w/ Nitto Invo's 275/35's & 315/35's / Steeda Sport springs / Koni STR.T's / Steeda PHB / GT500 Spoiler / Roush upper and lower grills / Stillen front splitter / Boss steering wheel
TommyV is offline   Reply With Quote
Old 09-05-2012, 06:31 PM   #5
Registered User
Newbie
 
Join Date: Jul 2012
Region: Texas
Posts: 16
Make sure all your bolts are tight
RedBandit11 is offline   Reply With Quote
Old 09-05-2012, 07:14 PM   #6
Registered Member
Regular
 
Join Date: Jul 2012
Region: Florida
Posts: 441
Re: Rear suspension clunk

im just wondering if you found your clunk? if so fill us in?

---------- Post added at 08:14 PM ---------- Previous post was at 08:12 PM ----------

my exhaust hits the rear end vent cap on drivers side and it hits the the front of the housing , and it annoyed the hell out of me everytime i hit a bump it hit so i heated up the pipe and took a hammer to them and now no clunk.....
__________________
Boss IM, with Araid cai, bama 93 race tune, GT500 cat back, jba off-road x-pipe & longtubes, mgw shifter,4.10 gears, Aluminum Flywheel & driveshaft, Adjustable Panhard Rod, BMR adj. uca & lca, BMR relo. brackets, BMR Springs with 1.5" drop, BMR adj. swaybar, BMR tubular K member 1/2 drop motor mounts & BMR tubular A arms, steeda alu. rad. support, aluminum water pump pully, 85mm BBK TB, Rear seat delete. Boss oil cooler, Battery in trunk. AC delete, Evap delete
brianw64 is offline   Reply With Quote
Reply

Lower Navigation
Go Back   Mustang Evolution > 1979-2015 Mustang GT || Tech and Talk > 2011-2014 Mustang GT

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


» Like Us On Facebook



04:04 PM


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0

MustangEvolution.com is in no way associated with or endorsed by Ford Motor Company.