Mustang Evolution Forum banner

Micro switch for nitrous kit

2K views 3 replies 4 participants last post by  CorDog009 
#1 ·
Is a micro switch needed I use a throttle switch from Texas nitrous technology
 
#4 ·
If you have the WOT switch that's wired in and triggered by the TPS sensor, you don't need the micro switch. Those are used if you want to mount it to be triggered by the gas pedal itself or externally on a TB where it can be triggered at WOT..we have drive by wire so nothing is there externally to activate it. Both of those are still safer than the button on the steering wheel ( I had one of those on my dragboat :) )
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top