Mustang Evolution Forum banner

UCA question

842 views 4 replies 4 participants last post by  scottydsntknow 
#1 ·
Did an 1.5 " drop on the rear and will need to install adjustable UCA.
Plan on going with BMR my question is have most of you installed the mounting bracket as well.
Looking for a show of hands here, especially anyone with power adder (boost, nitrous)
Thanks!
 
#4 ·
Rear UCA

Thanks!
Plan on replacing UCA, bracket and diff bushing with BMR EN001 (Bush), BMR UCM002H (mount) and BMR UTCH038H (adj UCR).
Pulling driveshaft to get accurate pinion angle measurement/adjustment.
Sounds like a whole afternoon.
 
#5 ·
Don't have a S197 but I have heard that bolt under the seat that holds the UCA bracket onto the car is holy omfgwtf yoga balls tight so be prepared for that.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top