Originally Posted by dreamstang
U may have to replace the hose.is your clamp towards the end of where it. Connects?or is the hose note going all the way on when clamping it?
The clamp tightens up good but the hose fits on the sc pretty loose so even when I tighten it, the hose eventually slips off. I'm gonna call vortech and see if they can send me a correct size hose or a cupling to make that hose fit or something. I cleaned up all the oil with brake cleaner and left it all nice and dry. With a LOT of patience I was able to get the hose to stay. I know it will slip off as soon as oil hits it but for now it should be good. But my check engine light still doesn't go away. Do I have to take that off with the scanner?
---------- Post added at 12:40 AM ---------- Previous post was at 12:37 AM ----------
The space on the sc for the clamp to grab on to is very limited. About an inch. Only a bit bigger than the actual clamp. So if I'm off by a little the whole thing just comes off while I'm tightening. I will try to have some pictures up tomorrow morning