I finally got all my parts in from VMP so I'll start the blower swap in the morning!
2.3L TVS/2.8 pulley
GT500 throttle body/inlet
NGK TR6 plugs
VMP pump booster
VMP 3000 maf
Hilton's high boost overlay
Autometer ultra lite wideband
See I was thinking the same thing and was ready to go all out with a Glenn's Performance return and Id1000's and Justin told me that the stock pumps /lines with a booster and 60lb'ers would be plenty for my goals...which is 600/630rwhp
After I get it all on and data logged and send Justin the log file, he's going to tweak my tune and then after that, I'll schedule a tune session with HPP and let you know what she puts down....if I can get pretty close to 630 I'm just gonna run with it and not dump another $2,500 into it for a fuel system....I'm never gonna use anymore hp that that anyway!
Got to looking at everything that was sent in the kit and couldn't find the damn bolts for the gt500 throttle body so I talked to VMP and found out I can't use the stockers because they're too short...they told me the right size I need and low and behold...Fastenal doesn't have them in stock and would have to order them, plus I would have to buy the whole dang box of 32! So I got a hold of VMP again and they are gonna send me the bolts I need to get this install rolling!