Replacing rear and front bumpers - Mustang Evolution

Go Back   Mustang Evolution > Ford Mustang | Wrenching, Care and General Topics > Mustang DIY and Technical



Reply
 
Thread Tools Search this Thread
Please support our sponsors and let them know you heard about them here!
Old 10-09-2015, 10:37 PM   #1
Registered User
Newbie
 
Join Date: Jul 2015
Location: Lexington
Region: Kentucky
Posts: 2
Question Replacing rear and front bumpers

Hey yall

So I'm converting my V6 front end to the GT front end, as well as removing the 2010 single-exit exhaust rear valence and replacing it with a 2011 dual-exit exhaust valence I got from a friend, in order to install a custom true dual system. But that's for another thread. This thread is specifically for the bumper removal.

My question(s) here lie with how I get the front and rear bumpers off. I have seen lots of tutorials and stuff online so I definitely know how to, but I haven't seen what size screws/bolts I will need to be removing and reinstalling. I know that a majority of it is held on by clips and pins, but what tools will I need for the rest? Just want to make sure i have everything before I start on this. Thanks.
medwardsr is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 01-19-2016, 06:29 PM   #2
Registered Member
Regular
 
Join Date: Jan 2016
Location: orlando
Region: Florida
Posts: 232
Not sure if it's the same for a 2010 but for my 2014 for the front bumper all I did to remove it and get out a small dent was remove the radiator cover by taking out the plastic pins and then under it you will see the bolts you have to remove that are holding the bumper I believe there's four not a hundred percent sure but you will know when you remove the radiator cover. Just take a ratchet and take those sucked out. Then you have to go underneath and remove that shield in order to get access to a sensor that's connected to the bumper and any fog light harnesses also to install the shield on the gt cover. There's about 20 screws holding the shield and it can get annoying i used a drill with an adaptor for an 8 ratchet socket to remove them quickly careful not to break them when reinstalling. Then just reverse the process but you have to fit the gaps just right so be sure to move the bumper around to where you want it before you say you are done it will take a lot of fitting to get it right if you are a perfectionist like me. Good luck and have fun. BTW it's a fairly quick process it took me about 10 minutes or so to get it removed. Any other questions let me know.
rubyredv6 is offline   Reply With Quote
Old 01-23-2016, 10:41 AM   #3
Registered Member
Regular
 
Join Date: Mar 2015
Location: Somerville
Region: Massachusetts
Posts: 52
Hi, did you do this already?

I have my car in the body shop for a new front-end, and they were hesitant to order the GT parts, in case they wouldn't fit.
Tuzban is offline   Reply With Quote
Reply

Lower Navigation
Go Back   Mustang Evolution > Ford Mustang | Wrenching, Care and General Topics > Mustang DIY and Technical

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
gt front and rear bumpers? 93_347foxbody 1979-1995 Mustang GT 16 02-19-2012 10:30 PM
Looking for GT bumpers and 8.8 rear end Marcellus Pre-2005 V6 Mustang 2 04-30-2008 08:54 AM
GT and V6 Front Bumpers SpeedNStylez 2005-2010 Mustang GT 5 07-09-2007 01:06 PM
Front and Rear Bumpers? RioStang Mustang Audio & Video 14 08-25-2006 12:38 AM
Front & Rear bumpers.. 4 me :-( RioStang Mustang Parts for Sale and Wanted 0 05-14-2006 10:12 PM

» Like Us On Facebook



12:38 AM


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0

MustangEvolution.com is in no way associated with or endorsed by Ford Motor Company.