Maybe I can get some answers here?
So i got a NX plate kit installed 07 GT, and took it to get tuned everything worked good. I have a MSD window switch. Nitrous
kicked on at 3,000 kicked off at 6,000
Now here's the problem after it came back down to when it was in neutral to 6,000 then the nitrous kicked back on again!
I don't see any wires going to the TPS just to the coil pack. Is that the issue I did not install it, a shop did. Almost cost me my motor...
Luckily my tuner saved the motor and we cranked all the extra nitrous out the motor!
Does the MSD Window Switch connect some how to the TPS so the nitrous activates on WOT?
Or will I have to hook up the WOT box to my MSD then to my TPS so I don't have the same issue with nitrous spraying while the RPM is coming down in neutral?
Sent from my iPhone using Mustang Evolution