I will be the pseudo guinea pig for this experiment.
It has already been done and well documented how to install a 2013 premium cluster with track apps into a 2012 model GT. It was pretty complicated as the communication between the 2012 PCM & Cluster needed a "black box" or converter so it could read the data.
For the 2012 swap, a new ABS module is also needed for the Track Apps to be accessed.
Watching everything unfold over the months of research and testing they did on the original swap thread, it became pretty apparent that a '13 to '13 swap would be a lot less involved (in theory).
So this is where I come in. Thanks to those three guys that have more electrical/tech knowledge than I can believe, and shared it all online, I am relatively confident I can pull this off.
I have talked to a couple of the guys that did this with their '12 I have a '13 Track Apps Premium Cluster in hand. (Thanks to TCopp on this site for picking the cluster up as it was a local craigslist sale in his area!)
I bought the 4-pad switch for the left-hand side of the steering wheel and it will be here by the end of the week. I will post step-by-step pics of everything as I go so anyone should be able to do this without a lot of technical experience.
Here is my premium cluster w/Track Apps - Thanks TCopp!
2013 track apps cluster
Part Number DR3T 9E740 BBW you will need. Found this one on eBay shipped for $30.00
Besides the cluster & the CC switch, you will need your dealer to do the following:
1) PATS RELEARN - this is your passive auto theft system, you can start your car with your cluster, and plug in this cluster to test and check it out, but if you try to start your car prior to the PATS RELEARN, your car will not start with the swapped cluster.
2) Load ASBUILT data into the new cluster. This will allow your PCM to communicate with the cluster.
3)Odometer reset - Dealer or some aftermarket shops can sync your odometers
Researching, it looks like the 2013 ABS module that feeds data for the Track Apps is the same for 2013 mustangs. Having the correct ABS module and not having to purchase a "black box" saves you $400 over swapping this into a '12! :good:
The clusters are hard to find. They show up on carparts.com and eBay but go quickly. One on eBay went for $160 and that is ridiculously cheap, but it was a km/h cluster. The only thing I hate is the font and layout of the gauge. I have a boss gauge without the LCD, and am thinking of trying some way to also do a face swap. We will see.
First things First
It has already been done and well documented how to install a 2013 premium cluster with track apps into a 2012 model GT. It was pretty complicated as the communication between the 2012 PCM & Cluster needed a "black box" or converter so it could read the data.
For the 2012 swap, a new ABS module is also needed for the Track Apps to be accessed.
Watching everything unfold over the months of research and testing they did on the original swap thread, it became pretty apparent that a '13 to '13 swap would be a lot less involved (in theory).
So this is where I come in. Thanks to those three guys that have more electrical/tech knowledge than I can believe, and shared it all online, I am relatively confident I can pull this off.
I have talked to a couple of the guys that did this with their '12 I have a '13 Track Apps Premium Cluster in hand. (Thanks to TCopp on this site for picking the cluster up as it was a local craigslist sale in his area!)
I bought the 4-pad switch for the left-hand side of the steering wheel and it will be here by the end of the week. I will post step-by-step pics of everything as I go so anyone should be able to do this without a lot of technical experience.
Here is my premium cluster w/Track Apps - Thanks TCopp!
2013 track apps cluster
Part Number DR3T 9E740 BBW you will need. Found this one on eBay shipped for $30.00
Besides the cluster & the CC switch, you will need your dealer to do the following:
1) PATS RELEARN - this is your passive auto theft system, you can start your car with your cluster, and plug in this cluster to test and check it out, but if you try to start your car prior to the PATS RELEARN, your car will not start with the swapped cluster.
2) Load ASBUILT data into the new cluster. This will allow your PCM to communicate with the cluster.
3)Odometer reset - Dealer or some aftermarket shops can sync your odometers
Researching, it looks like the 2013 ABS module that feeds data for the Track Apps is the same for 2013 mustangs. Having the correct ABS module and not having to purchase a "black box" saves you $400 over swapping this into a '12! :good:
The clusters are hard to find. They show up on carparts.com and eBay but go quickly. One on eBay went for $160 and that is ridiculously cheap, but it was a km/h cluster. The only thing I hate is the font and layout of the gauge. I have a boss gauge without the LCD, and am thinking of trying some way to also do a face swap. We will see.
First things First