Mustang Evolution Forum banner

Did the PVC delete Mod!!!!

4K views 13 replies 4 participants last post by  slvr2000stang 
#1 · (Edited)
Did the PCV delete Mod!!!!

Damn another mod I was lazy about doing. With the 216/225 Cam the Idle is lopey and depletes my vacuum at engine start up and at slow speed for my brakes. I decided to do the PCV delete and the delete the tube from the drivers side valve cover to the CAI. I havemore vacuum now and my car shakes have as much at idle. Before the mod The Cams lopey idle and having a moment where both the Intake and exhaust valve was open at the samew time gives a pulsating vacuum and causes the PCV to rapidly open and close causing the car to shake more than necessary.

Damn why did I wait a year to do it ???

Cost

2 ea APC chrome valve cover breather filters 17.50
 
#5 ·
232stang said:
i always thought it was called pcv guess (pvc is for plumbing in your house) i was wrong. any write ups corey. is this mod neccesary when before i do my pp heads intake and cam or should i wait till i do that next summer.
Just do it at the same time it will be easier to get to all the plumbing since it will be all off.
 
#10 ·
Hey, I still need to do this mod myself Corey. I need to talk to you tonight about it. I'm sure it would help my performance a little more too. My vaccum at idle when I first start the car is 12 hg/in, and after I drive for about 10 minutes, it's up to 14 hg/in. What's yours at?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top