Mustang Evolution

Mustang Evolution (http://www.mustangevolution.com/forum/)
-   Pre-2005 V6 Mustang (http://www.mustangevolution.com/forum/f133/)
-   -   Exhaust (http://www.mustangevolution.com/forum/f133/t296767/)

Fordhartbreaker 12-28-2011 09:21 AM

Exhaust
 
Today is the day I finally get my dual exhaust done leaving in ab 20 mins went with flowmaster 40s and h pipe thanks to everyone for the help and hints hope it sounds like I hope I'll let y'all know

TaylorF25 12-28-2011 11:02 AM

Please post a video and tell us how it sounds. I'm getting mine done soon as well and haven't quite made up my mind yet.

Fordhartbreaker 12-28-2011 12:00 PM

Will do maybe not today but it will get done

Fordhartbreaker 12-28-2011 02:05 PM

So not what I thought it would be... Thinking ab cutting last two cats out it's just not loud enough

97Stallion 12-28-2011 02:54 PM

Re: Exhaust
 
I went with an X-pipe and Flowmaster 40's, but it's too loud for me. Gonna redo my exhaust here soon and go with 50's. is your h-pipe welded to your cat-back or is it bolted on? If you're looking for louder, i have an O/R H-pipe i would like to get rid of.

Fordhartbreaker 12-28-2011 02:58 PM

The pipe is right after the cats

---------- Post added at 03:58 PM ---------- Previous post was at 03:56 PM ----------

Quote:

Originally Posted by 97Stallion
I went with an X-pipe and Flowmaster 40's, but it's too loud for me. Gonna redo my exhaust here soon and go with 50's. is your h-pipe welded to your cat-back or is it bolted on? If you're looking for louder, i have an O/R H-pipe i would like to get rid of.

Do u have ur cats bc I can't even hear it in the car mashing on it

97Stallion 12-28-2011 03:00 PM

Re: Exhaust
 
yup i have 2 hi-flo cats.

Fordhartbreaker 12-28-2011 03:01 PM

Just two or all four?

97Stallion 12-28-2011 03:08 PM

Re: Exhaust
 
i only have 2 total cats and they are both hi-flow

Fordhartbreaker 12-28-2011 09:49 PM

I will say this tho it has more pep ik it only added like maybe 2hp but it does feel more peppy

KM98Stang 12-28-2011 10:39 PM

If I'm doing the m90 swap on my 98 6er can I run it with hollowed out cats??

SonicBoom239 12-29-2011 02:43 AM

Re: Exhaust
 
Quote:

Originally Posted by 97Stallion (Post 1014879)
I went with an X-pipe and Flowmaster 40's, but it's too loud for me. Gonna redo my exhaust here soon and go with 50's. is your h-pipe welded to your cat-back or is it bolted on? If you're looking for louder, i have an O/R H-pipe i would like to get rid of.

the 40's aren't your problem..it's that damn x pipe

@OP...do you have emission testing...if so you'll have to plan around the code that will pop up from cutting off the two cats...will you be leaving the two resonators on there btw or will they be gone as well?


@KM...yes you can. again keep in mind if you have testing in your area and what you'll need to do to get around it.

00GT TURBO 12-29-2011 02:49 AM

1 Attachment(s)
I just went straight piped on mine and had it dump off on the ground underneath the driver and passenger seats exhaust wasn't done yet in the pic

SonicBoom239 12-29-2011 02:50 AM

Re: Exhaust
 
Quote:

Originally Posted by 00GT TURBO (Post 1015293)
I just went straight piped on mine and had it dump off on the ground underneath the driver and passenger seats exhaust wasn't done yet in the pic

been there done that...hated the outcome

00GT TURBO 12-29-2011 02:55 AM

Quote:

Originally Posted by SonicBoom239

been there done that...hated the outcome

I like it really well it's not a daily driver so it's always something new to me I guess why didn't u like yours?

Fordhartbreaker 12-29-2011 12:04 PM

What diameter of pipe do u guys have??

SonicBoom239 12-29-2011 02:11 PM

Re: Exhaust
 
Quote:

Originally Posted by 00GT TURBO (Post 1015298)
I like it really well it's not a daily driver so it's always something new to me I guess why didn't u like yours?

to much vibration from a dumped setup for me or the little lady to enjoy

---------- Post added at 02:11 PM ---------- Previous post was at 02:10 PM ----------

Quote:

Originally Posted by Fordhartbreaker (Post 1015476)
What diameter of pipe do u guys have??

2.5"

00GT TURBO 12-29-2011 02:17 PM

Quote:

Originally Posted by SonicBoom239

to much vibration from a dumped setup for me or the little lady to enjoy

---------- Post added at 02:11 PM ---------- Previous post was at 02:10 PM ----------



2.5"

The vibration doesn't bother me much but I did make some adjustment's with a few things inside the car to keep it from rattling

97Stallion 12-29-2011 07:43 PM

Re: Exhaust
 
Quote:

Originally Posted by SonicBoom239 (Post 1015291)
the 40's aren't your problem..it's that damn x pipe

@OP...do you have emission testing...if so you'll have to plan around the code that will pop up from cutting off the two cats...will you be leaving the two resonators on there btw or will they be gone as well?


@KM...yes you can. again keep in mind if you have testing in your area and what you'll need to do to get around it.

No its the 40s that are the problem... Even flowmaster acknowledges the high interior noise, hence that's why they made the 50s.

---------- Post added at 09:43 PM ---------- Previous post was at 09:37 PM ----------

Quote:

Originally Posted by Fordhartbreaker (Post 1014880)
The pipe is right after the cats

---------- Post added at 03:58 PM ---------- Previous post was at 03:56 PM ----------



Do u have ur cats bc I can't even hear it in the car mashing on it

My wife and the whole neighborhood can hear me the morning when I leave for work. Both of my neighbors told me they use my car as an alarm clock. My wife also said she can hear when I get on the highway in the morning as well, which is about1/4 mile away. So yeah too loud.

SonicBoom239 12-29-2011 10:00 PM

Re: Exhaust
 
then get some 50's and fix it...not a hard issue to fix


03:25 AM

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.