What is it and what you got.
BBK CAI, hooked up for juice but running empty at the time
Long tubes, cat-less, o/r x-pipe with flow masters
245 17's front, 275 17's rear
Gripps Camber plates
Original v6, auto..
Swapped 8.8" rear from '01 GT.
5.0l, T5, etc. out of '94 GT.
BBK CAI, BBK 70mm TB, Professional Products Elbow and Intake Manifold, Cobra Heads, E-cam, BBK Shorty Headers, o/r H, flowmasters, dumped just after rear tires. BBK Strut Tower Brace, PRO 5.0 Shifter, 17x9 Cobras, and the worst paintjob in modded Mustang history...
04 Cobra "Terminator"
Mac Pro Chamber
Flowmaster 40s CB
SCT Bama Tune
88 gt vert
Umi lift bars
Reinforced t boxes
King cobra clutch
Wieand stealth intake
Holley adjustable fuel press reg
Holley 670 street avenger carb
Scorpion 1.72 rr
Full msd ignition
3g high amp alternator
Summit shorty headers
O/r h pipe
10 series flows dumped
Weld draglite rims with falken tires
11 gt premium conv
285 rear continental extreme summer tires
Shelby gt500 style stripes
Cdc front chin spoiler
Lower rocker panel stripes
Pypes supersystem catback exhaust
Next on the list is the tune and cai and eventually turbo
Re: whatcha got?
i feel like a wimp compared to you guys lol.
90 mustang gt black on black
full 3 inch exhaust,bbk of road h,flowmaster 2 chamber 40 series
pa performance alternator
all kicker speakers but still rocking the stock radio lol.
bbk strut tower brace
under hood air intake
alot of new **** just fixing this car.next on the list,air conditioning then suspension build begins.
White '99 v6
Gt 5 speed manual tranny
95 cobra r chrome rims
Dual flowmaster 40's with o/r x pipe
K&n cold air intake
Engine bay support brace
5% tint all around
Full alpine speaker system w/ amp
Not doin any more mods cause I want to get an 03-04 gt or Mach 1 in the near future hopefully
90 mustang gt
306 w/tons of goodies..
AFR 165 heads b303 cam
1.6 svo rollers 70mm tb pro flow maf
Paxton novi 2000 15 psi..cobra upper and lower
Full Saleen suspension
C-4 fully built 3600 stall with safety loop.
4" aluminum driveshaft
Torque boxes welded up solid..
Built 8.8 31 spline hardened axles.. 327 gear with mini spool.. C clip eliminators
Centerline rims wrapped in MT e/t streets and MR front runners..
I make corvettes look stupid!!!
Re: whatcha got?
2006 Mustang GT Manual
4.10 Ford Racing gears
1" Ford Racing lowering springs
C&L Intake with SCT X3 Tuner running a 93 race tune from Bama.
Pypes Long Tube Headers
Pypes Off Road 'X' Pipe
Pypes Violator axle backs
Stillen Front adjustable sway bar set to 2nd slot.
Stillen Non adjustable rear sway bar W/ polyurethane bushings
Freedom Racing Adjustable panhard bar with Polyurethane on the chassis end and Heims on the axle end.
J&M Lower Control arms with Polyurethane end and pivot ball.
B&M Relocation Brackets set to first hole for almost stock angle. Not welded.
Hurst Short Throw Shifter
18x10 AMR Charcoal wheels in rear with 275/40 Nitto 555
18x9 in front with 255/45 also on Nitto 555
Re: whatcha got?
2011 5.0 6MT
Staggered Boss 338s 20x8.5 & 20x10
Bama 93 race tuned
374WHP and $2k burning a hole in my pocket,lol.
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.