Cool! I need to look him up again, when he ported his heads he asked
about "V6 Specifics" and I gave him a few, hopefully it helped. His cam
was pretty much an NA or possibly an SC (centrifugal) cam, but even
on my sims it does well for his type setup. He must be running big boost,
He's doubled his RWHP over NA, but that might be an old combo I'm
remembering. He did quite well with it NA using a bigger single port
cam than either TomY or I used for our first NA single port combos.
Matt does all his own work, which is easy for him, he works at Delk
which is a big 5.0 shop in Tennessee. The 3.8 is really close to a 5.0
in displacement per cylinder...like .6 cubes larger actually (per cylinder).