Bolts for seats?

[Dom]

I'm gonna take my seats out soon to clean then, and the carpet underneath there. The dude that had the car before me spilled coffee everywhere and I'm gonna take care of that now. I'm just gonna unbolt the seat and the track from the floorboard, but I only see two bolts underneath the car. Are the bolts welded on underneath there or what? The Haynes manual isn't helping.

[SpectorV]

you have two bolts that are made into the floor board, at the front of the seat, these take nuts, 15mm, you can see these easy by just sliding your seat backwards, good to get these first i think, then if you slide the seat forward you will see the bolts, which the ends of stick out from under the car, remove those also 15 mm and then the seat comes up and out, for the driver side you will have to tilt it forward and unplug the power, while its out go over it and tq down all the seat bolts to tighten it up.

the day before if you have time spray some penetrator on the bolts to make em come out easy.

[Dom]

Ok, I was just making sure two bolts were made into the car. Thought I was seeing stuff.

[SpectorV]

yea, two go out under the car, and the front two are just nuts.