it pops right out, just take a long phillips screw driver, not that long... but what ever, and run it under the edge of the bottom seat where it meets the carpet starting at the side of the car by the door and you will hit a bump, there is a little butting you push in on the front of that bump push it in with the end of the screw driver, when you hit the bump you will have to move the screw driver to the front of it, the button is NOT on the side, and then just pull up, same on the other side, the buttons are about 12 inches in from each side then the whole bottom parts just comes right out... not much to it.
__________________
2003 REDFIRE COBRA #3938 of 5082 @ 05/27/2003 1 of 414
MGW Shifter, Stingers, JLT, SS Inserts, MM FLSFC & CC Plates, SS Lines, H&R Race springs, IRS Brace, MRT Hood Struts
ME.com Member #29 - 400rwhp/380rwtq