New with Tires and need some Help with 18x10 on front?

[klos1c]

Hello, I bought some Roush rims yesterday i was very exited to get them. but as i stearted reading some posts i noticed that most people have 18x9 on the front and 18x10 on the back. All 4 rims i bought are 18x10 is there a way i can work with the 18x10's on the front? i have a 1994 mustang cobra.

Thanks,

[SpectorV]

the 10 inch rim wont work on the front, the offset is probably such that they will stick out bad. Measure to find out though. Measure from the mounting surface to the back of the rim lip (straight line put something across the back of the rim to measure to)

If its more than 6 its to deep probably~ but if the rim width (10 inches) - the back spacing is more than 3-3.25 then its gonna stick out to much.

[klos1c]

ah ok.....ill give it a try this weekend. thanks

[SpectorV]

if they are made for your car though I can about tell you they wont work on the front. You can probably pick up some 9 wide rims in a trade though as the 10s are worth more of course