Limited Slip

[Rainman64]

Hi,

Well I finally got my engine completed (stock 93 302 bottom, E303 cam, AFR 165 heads, 1.7 ratio rollers, edelbrock RPM intake along with edelbrock 4 barrel, JBA shortie headers, and 4R70W tranny) as far as I think I need to go and now need to look at the rear end. I want to put in a limited slip, ratio between 3.5 and 4.0 (not real hard over on that). I would like ideas or suggestions from anyone that has done, or thinking about doing this mod. Thanks

Forgot the car is a 64 1/2 Conv!

Doug

[SpectorV]

what rear does it have? with the power you should be making I would watn an 8.8, and those come with a limited slip already~ I would up the gears ( and rebuild the tlok unit ) with 3.73s or 4.10s if you dont drive it that much.

[Rainman64]

Right now it has the stock 3.00. I've been told to get a pre assembled chunk and put it in the original housing. I don't do track stuff, so I don't need the best.