well the first step would be pulling the clear cover and checking the needle, make sure its not to close to the gauges, if it is it can get stuck and do wonderful things. I doubt this... and if you pull that needle off.... you will have to drive down the road and stick it back on so just pull it out very gently to give it a little room between it and the gauge face.
Now check the VSS sensor located on the tranny. Make sure its in good and what not. After this.... check the line and then you will need to go furhter into the electrical system.
__________________
2003 REDFIRE COBRA #3938 of 5082 @ 05/27/2003 1 of 414
MGW Shifter, Stingers, JLT, SS Inserts, MM FLSFC & CC Plates, SS Lines, H&R Race springs, IRS Brace, MRT Hood Struts
ME.com Member #29 - 400rwhp/380rwtq
|