Welcome to Mustang Evolution.
|
  |
|
|
|
12-07-2005, 10:35 AM
|
#1
|
|
  |
|
Need pricing help again...1990 Notch
|
|
Imma Ho...
Join Date: Aug 2004
City: Baton Rouge
State: Louisiana
Posts: 9,956
|
Ok, I am about to fall into a pretty nice deal as long as my neighbor doesn't change his mind. He has a 1990 Notch, red, 5 speed, worked over 302 (cams, intake, heads, not sure what else), cobra R rims, and a few other nice-ities. The paint is in great shape. The body is straight. No dings, scratches, all gaps match. I don't have all of the specs on the engine, but I do know it used to run nitrous and if I remember right used to have a procharger.
Now, he has decided to sell the car. I am guessing because his wife is on his ass about it because he never drives it. Since he isn't in a hurry to sell the car, he is going to hold it for me so he can tell his wife it is sold. 
So, what do y'all think is a decent price for a 1990 notch in the described condition? I am not sure on the mileage at this point, he is taking me out for a ride in it this weekend in exchange for a ride in my car so I can find out then. We haven't talked price yet, so I thought I would check with some of y'all.
so, any input?
__________________
|
|
|
|
 
|
12-07-2005, 10:37 AM
|
#2
|
|
|
|
Re: Need pricing help again...1990 Notch
|
|
postarama
Join Date: Aug 2003
City: Southaven
State: Mississippi
Posts: 24,290
|
Hm...no idea man..but sound like you found a good project car.
__________________
"I'm not driving too fast...just flying too low"
Mine:
-87 ranger- broke
-03 SB Cobra vert- 2552 of 5082 Born 02/25/03
Our's:
90 7up vert - new project
|
|
|
|
|
|
12-07-2005, 01:22 PM
|
#3
|
|
|
|
Re: Need pricing help again...1990 Notch
|
|
I kill you
Join Date: Feb 2004
City: Madison
State: Alabama
Posts: 2,122
|
Hmm i'd say maybe 3500-4500 but I dont think i'd give him anymore then that. Specially since its ran nitrous.
__________________
2004 Ford Ranger Edge
1993 Ford Explorer Sport 4x4
Non-Mustang Owners Club member #2
|
|
|
|
|
|
12-07-2005, 02:14 PM
|
#4
|
|
|
|
Re: Need pricing help again...1990 Notch
|
|
WTF^^...
Join Date: May 2003
City: Hoover / Florence
State: Alabama
Posts: 27,117
|
notches are far more expensive than hunchbacks. My friend paid 2 grand for a non running rusted over notch... lol
__________________
2003 REDFIRE COBRA #3938 of 5082 @ 05/27/2003 1 of 414
MGW Shifter, Stingers, JLT, SS Inserts, MM FLSFC & CC Plates, SS Lines, H&R Race springs, IRS Brace, MRT Hood Struts
ME.com Member #29 - 400rwhp/380rwtq
|
|
|
|
|
|
12-07-2005, 02:21 PM
|
#5
|
|
|
|
Re: Need pricing help again...1990 Notch
|
|
sʞɔns ʇuǝɹq
Join Date: May 2003
City: Macon
State: Georgia
Posts: 10,739
|
I paid $2000 for a 93 notch with a 100k miles, 4 banger, 5 speed, nice paint, and mint interior. I also paid $2000 for a 90 notch with 15k miles on the rebuilt 5.0, 5 speed, bullet proof rear, alright paint (flaking off in some areas, no paint on hood), and a torn up interior.
Since you are getting the best of both worlds, I am guessing $3500-$4500 is about right, depending on mods.
__________________
-Jimmy I drive a station wagon.
GO BRAVES
|
|
|
|
|
|
12-07-2005, 02:22 PM
|
#6
|
|
|
|
Re: Need pricing help again...1990 Notch
|
|
sʞɔns ʇuǝɹq
Join Date: May 2003
City: Macon
State: Georgia
Posts: 10,739
|
__________________
-Jimmy I drive a station wagon.
GO BRAVES
|
|
|
|
|
|
12-07-2005, 04:41 PM
|
#7
|
|
|
|
Re: Need pricing help again...1990 Notch
|
|
WTF^^...
Join Date: May 2003
City: Hoover / Florence
State: Alabama
Posts: 27,117
|
__________________
2003 REDFIRE COBRA #3938 of 5082 @ 05/27/2003 1 of 414
MGW Shifter, Stingers, JLT, SS Inserts, MM FLSFC & CC Plates, SS Lines, H&R Race springs, IRS Brace, MRT Hood Struts
ME.com Member #29 - 400rwhp/380rwtq
|
|
|
|
|
|
12-07-2005, 06:15 PM
|
#8
|
|
|
|
Re: Need pricing help again...1990 Notch
|
|
Bob is Good.
Join Date: Jun 2004
City: Greenville
State: Texas
Posts: 5,165
|
It's hard to say without the mileage and more detailed list of mods. But if the mileage is fairly low (80k or less) and the heads, cam and intake are good parts... I'd say up to around 6k is fair. Especially for a coupe, prices on them have gone up considerably. Now like I said, this is largely dependent on the mods... if the heads are GT-40 irons and the cam is a B cam is gonna be worth a lot less than a car w/ AFR 165's and a custom cam.
If the car has been heavily modded, which it sounds like, a lot of the value will depend on the quality of work done as well. Still, generally speaking a nice clean notch will run at least 4.5k around here. One was for sale recently for 5.5k and sold in a day... which sucked cause I was interested in it. |
|
|
|
|
|
12-08-2005, 03:14 PM
|
#9
|
|
|
|
Re: Need pricing help again...1990 Notch
|
|
Registered User
Join Date: Jul 2004
City: Severn
State: Maryland
Posts: 1,805
|
if he put camS into it something is wrong  we only have 1  but 3500-4500 sounds like a fair price to me...but since he ran forced induction id rebuild it personally just to be safe. so id watch out for that could be a timebomb could be a good daily driver, ya never know.
__________________
Member #5 of the ME.com 5.0 Club
Current:
1985 Mustang GT Hatchback
Past:
1990 Mustang GT
1988 Mustang LX 5.0
|
|
|
|
|
|
