Dyno Results: 278.2 RWHP SAE V6 Baby!

[Rygen]

Well some of you may have known that my car has been in the shop for 5 days for some work. What a long 5 days it was to be with out my baby. First the bad news, I am missing some dyno sheets that are sitting back in the shop at Excessive. But the good news is I have the dyno sheets that count. I will go back to Excessive later this week, print them and then scan them.

Now, let’s start with the X pipe, I know all of you saw my post, but I will include it here so it is all inclusive. Before this round of mods, I had a Magnaflow dual kit with Y pipe. Details as follows:

X Pipe Gains

• 193.9 RWHP SAE (before)
• 195.8 RWHP SAE (after)

Sound: She is somewhat deeper, and I can hear more of a throaty sound at higher rpms. But she does thin out at really high rpms. To get really deep at all RPM’s, it looks like MSP’s write up was accurate regarding the prochamber. And the MRT mufflers might help as well.

So pretty much 2 RWHP gain on NA. Following this, I decided to change the whole approach of my car. Now all of you are familiar with Scrming’s kick butt car, and mine is somewhat similar. 4.10s, Zex, Auto, etc. Well, I needed Excessive to fix the gear whine in my car. They said they couldn’t do it because the first shop that installed them wrong and now that they are broken in, they will whine forever. Just great. So after hearing that darn whine over and over again, I told Excessive to put in new gears. But this time, I went back to my original plan. After seeing other unnamed individuals video’s of bad tire spin at the track, I decided to take it down a notch and put in FRPP 3.73’s. Test drove the car, no more gear whine and still launches good on my auto.

Tunable Induction Tune

• 195.8 RWHP SAE (before)
• 197.5 RWHP SAE (after)

So they loaded up John DeMolet’s tune and netted another 1.7 RWHP and 3.3 RWTQ SAE. Not bad, every bit counts. John’s tune designed for the NKG spark plugs I have, so his runs at 13.4 AF, while the Excessive tune I had runs at 12.7 AF.

Now, for the fun part (and I got the dynos for this one coming!). Now it’s time for the 100HP shot of N20. Well, right before we do the N20, I had a PHP Alternator Pulley order and sent to Excessive to give me that tiny little 4HP edge Scrming posted about awhile ago. So Chris put that in, and spent an entire day tuning the car for Nitrous, and making sure the AF levels were good, timing good, checked my spark plugs, test drove it, etc. So here is the configuration I have with the N20:

Zex 100 HP Shot

• FRPP 3.73 Gears
• PHP Alternator Pulley
• Zex 100HP Shot
• Excessive Tune
• 278.2 RWHP SAE (for you STD lovers out there – 285.9)
• 362.1 RWTQ SAE (for you STD lovers out there – 373.2)

When Chris and Larry came back from the test run, they were grinning ear to ear. Chris said it will smoke a stock GT any day of the week. I didn’t solicit this response from him, as I got my sights on some import tuners. But he said it without prompting and was quite proud of it. There were two cobra owners in the shop today and hearing it thought it was an 8 and Larry was like, no that’s a 6, one of the few we work on. Then he rattled off the numbers and their eyes went wide. It was cool. In fact they were great mustang owners, giving me tips on lower control arms, telling me not to go with over aggressive lowering springs as it will hurt my track times. And they gave me a lot of good information about the local tracks.

For those of you that live in the DC/VA/MD area, the cobra guys suggested SumerDuck dragway, they said mostly stangs hang out there and they are all good people. http://www.sumerduckdragway.com/

That’s about it; I will be posting some dyno sheets tonight once I get to the office. Now, there is only one problem, I think Excessive forgot to do a before/after tune on my PHP Pulley, but I will call them, it might be one of the sheets that was left behind. But I will definitely get my Zex sheet up, I actually made them print it out in SAE before I left.

So all in all it was a long 5 days to wait, but I am extremely happy.

PS: I can’t resist….John (Scrming); you may want to tell Lidio that he has to beat 278. LOL. Though I think your new MRT will put you there. The arms race continues!!!!!

[n8r]

Very nice numbers!

[Rygen]

Quote: Originally Posted by n8r Very nice numbers!

Thanks!

[Brent]

Nice TQ numbers.

Very good read

[lowflyn]

Nice man.

[Rygen]

Here is my dyno for the Zex:



I think there is more to gain on the TQ side.

[Rygen]

Does anyone who is more technical have an opinion on my AF's? I want to make sure this N20 tune is safe.

[powerhungry966]

damn guy thats haulin ass

[SpectorV]

nice, I just cant see myself running the bottle lol I want the power all the time and I dont like going to the track I think you run one heat range colder and lower the gap on N20 plugs.

you should be getting way more than 2rwhp/3rwtq from a tune.

[Rygen]

Thanks!!!! I'll look into that.

Here is a few pics from this project for you guys (additional pics are on my web site):







I think Larry did a great job running the lines through the car. I pulled up the carpet so you can see them, but everything is clean. You can also see my new TI Shield that John sent me, much better now!

Enjoy!

[SpectorV]

clean that engine lol!

[Rygen]

Quote: Originally Posted by SpectorV clean that engine lol!

I knew this was comming. I will be cleaning it shortly.

[WhiteStang99]

gah, already with a dirty engine!

[dark]

awesome numbers! i enjoyed reading your website also. always nice to see a satisfied new mustang owner

i'm told there is a shop on the east coast working on a 4 cam conversion kit for the 05+ v6 engine, would be a cool thing to have so soon after launch

[Rygen]

Quote: Originally Posted by dark awesome numbers! i enjoyed reading your website also. always nice to see a satisfied new mustang owner i'm told there is a shop on the east coast working on a 4 cam conversion kit for the 05+ v6 engine, would be a cool thing to have so soon after launch

Thanks and I'm glad you like the site!!! I always get a rough time from the family becuase the rest of the site is empty, but the stang portion is constantly updated. I'm a junkie!

Yea, that would be a cool upgrade. You got any additional info on that. I wonder if it is Super Six Motorsports, they are in GA.

[Herbstang]

Very Nice Number I enjoyed the hell out of your web site Great job on the site

[dark]

Quote: Originally Posted by Rygen Thanks and I'm glad you like the site!!! I always get a rough time from the family becuase the rest of the site is empty, but the stang portion is constantly updated. I'm a junkie! Yea, that would be a cool upgrade. You got any additional info on that. I wonder if it is Super Six Motorsports, they are in GA.

nope, all it is really is hearsay. but it would still be cool

[Rygen]

Quote: Originally Posted by Herbstang Very Nice Number I enjoyed the hell out of your web site Great job on the site

Thanks, glad you like it!!! Wife gives me a rough time cause only the stang section is updated...LOL.

I'm going to be doing LCA's next. Can't wait!