Well with the internet down earlier this week for till wed i didnt get a chance to post pics from last weekend. Now i have pics from then and today.
Sunday morning i decided to do something productive. Pulled a lot of the old wiring out of the bronco. Sub/Amp wiring, grill guard lights wring, and cb wires. Ended up with about 10 pounds of wire and a couple things from my "ricer, neons are cool" phase 3 years ago
looks so much better in there now
We decided to have a BBQ with the new grill last sunday. So we were all up at the house having a good time, decided we needed a new project since the last one broke...started with all this, bet you can quess what is happening here
my original design
which was scratched for this design
we scratched because the way we believe the recoil will be with the bipod, which is being redesigned to
top layer of ice was pretty thick, 4 different types in there
working on putting the adapter on to power it by propane, screw white rain
just messing around in night mode
today when i pulled the tarp out of the barn to lay on the ground since it poured most of yesterday, i got a nice surpise
threw it about 20 ft with a stick and it wouldnt go away so i got 2 .40 cal Beretta rounds to it from about 15 ft away...now no lie, i used all 10 rounds
hit it in the head 1 time and towards the tail spilling its guts out
Chris taking the angle grinder to the 4.56 ratio pinion i bought for the rear. (stripped out)
new one going on. Ended up overshooting our point on the crush sleeve so we retreated to fight another day.
this was the point we went and got a piece of angle from Lowes
To come tomorrow: pics of work on chris' 84
