Will 99-03 parts fit an 04?

[patersmith]

Will this ( 99-03 FORD MUSTANG 3.8L V6 COLD AIR INTAKE W/ FILTER ) cold air intake work on an '04? It's listed for 99-03, but shouldn't it still fit?

Are there even any differences between the 04's and the 99-03's? Or would any part for a 99-03 work for an 04?

Thanks

[SpectorV]

the only differences in the cold air intake between 99 and 04 will be in 01 the placed the intake temp sensor into the MAF so you will need a plug to cut off the air flow since there is no sensor to put in the hole. Thats about it, if you have the sensor located behind the MAF then stick it in the hole, if you dont you best cap it off and the your good.

Cali mustangs have a smog thing in the fender on the side near the air filter and you may have to adjust its position to get the air filter to fit~ if the car is not equiped with this then your fine in that department.

[patersmith]

Awesome, thanks for the info SpectorV.

[DarkShadow]

Unfortunately, the 04's got left out of the loop for lists of what will fit because companies started gearing up for the `05 changes rather than updating their catalogs/lists from `03 to `04.

[justin00stang]

01-04 is pretty much all the same.