I've seen some in magazines and at shows but how do they it. After its painted do they reseal it with epoxy or silicone? I want to do mine in my body color and little slits in red. But i want to get OEM HID Ford headlight and they are little expentive to be chopping up not sure if there are some you can buy pre-done or what. Please help me
It is not that hard to take them apart and reseal. I've done it to my friends' cars but it is pretty universal. The way I did it was I took the headlight housing off the car and then put it in the oven at about 300 degrees for 10 minutes. I then pulled it open by hand (obviously with gloves) then cleaned out the old sealant and then put on new sealant. I used black RTV silicone on one and clear on the other car, whichever looks better. Not difficult at all