I have a 2006 Mustang Gt. It was in an accedent. I had to remove the engine and replace the frame rails. When I put everything back together I am now getting an constant Brake light and ABs light. I first assumed that after I bleed the brakes they would go out, since I had to remove the front brake lines to replace the rails. But they did not go out. Do these lights come on and then need a scanner to turn them off or will they go off when the problem is corrected? I checked all the fuses and they are OK. Fluid level is good and I bleed the system.
Are you a Mustang fan? If so we invite you to join MustangEvolution.com. Once you join you'll be able to post messages in our forums and upload pictures of your Mustang. You will also be able to browse our site with limited advertisements as a thank you for joining our community. What are you waiting for? Join up now and tell us a bit about your Mustang!
bleed the mastercylinder like 6 times, and then the brakes 6 times, they will go off when the problem is fixed.also make sure your power steering level is right.